Gate Parts & Welding Cost - What It Actually Costs, Quoted Free

Wrought iron

Wood & steel frame

Farm & ranch

Sliding driveway gates

LiftMaster operators

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Explore

Styles & brands we work with

01Wrought iron02Wood & steel frame03Farm & ranch04Sliding driveway gates05LiftMaster operators

Before & after

See the difference

Recent ProjectFull RestorationComplete Upgrade

BeforeAfter

BeforeAfter

BeforeAfter

How Much Does Gate Parts & Welding Cost in Dallas?

Gate parts and welding in Dallas typically run between $85 and $550 for most residential repairs, with full gate frame rebuilds or ornamental ironwork ranging from $600 to $2,800. Simple parts swaps like hinge replacements or latch repairs usually stay under $200, while structural welding work on sagging or damaged gates lands in the $350 to $1,200 range depending on the extent of the damage and the material involved. The price you pay comes down to three things: what part failed, what your gate is made of, and whether the repair requires on-site welding or can be done with bolt-on replacements.

Before we get into the numbers, know this: Carver Gate Repair Dallas writes every price down before any work starts. The number on that sheet is the number you pay. No revisions, no “we found something else” conversations after the gate’s already in pieces. Lonnie Burke runs this location on that standard, and it’s been the same since 2008.

If you’re researching because a gate is currently stuck open or hanging off its hinges, call (940) 531-9746. A live person picks up, day or night. We’ll tell you what we think over the phone, then we’ll show up and confirm it in writing.

Gate Parts & Welding Cost Breakdown (2026)

Here’s what Dallas homeowners are paying for common gate parts and welding work in 2026. These ranges reflect what we see across the metro, from Highland Park to Mesquite to Frisco.

These are real numbers from the Dallas market in 2026, not national averages. Dallas has a mix of older 1950s-era iron driveway gates in East Dallas and Lake Highlands, newer ornamental steel gates on custom homes in Preston Hollow and University Park, and plenty of chain-link and tube-steel gates in the surrounding suburbs. That mix matters: a welded iron gate from 1968 is a different repair than a powder-coated aluminum gate installed in 2021.

What Moves the Price Up or Down

Material is the biggest factor. Welding wrought iron is generally cheaper than working with aluminum, because aluminum requires more setup and a different welding process. Steel sits between the two. If your gate has ornamental details like scrolls, finials, or custom pickets, expect to pay more for matching fabrication work.

Access is the second factor. If our welding rig can pull right up to the gate, labor stays low. If the gate is at the back of a narrow side yard in a Lakewood bungalow and the welder has to run a 100-foot lead, that’s more time on the job. We’ll tell you that before we start, not after.

Third: whether the part is something we stock or something we have to order. Carver technicians carry the most common replacement parts for all nine gate motor brands we service, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. But structural gate parts, like custom-length steel posts or uncommon ornamental iron components, sometimes require a trip to a Dallas steel supplier. We build that into the written quote upfront.

What Affects Gate Parts & Welding Pricing in Dallas

Beyond the basics, Dallas has some specific conditions that affect what you pay. Here’s what matters here, on the ground, in this city:

• Soil movement in the Dallas metro. The clay soil in this region expands and contracts through every wet-dry cycle. Gate posts shift. Frames rack. Weld joints crack under the stress. Repairs in Dallas often require more than a simple patch because the underlying alignment problem has to be corrected first. We see this constantly in Carrollton, Richardson, and Garland, where the soil is particularly active.
• Gate age and original construction quality. Dallas has thousands of homes built between the 1950s and 1980s with original iron gates. Many were site-built and never primed on the inside of the frame. By 2026, those gates have 60 to 70 years of internal rust. A weld repair on thin, rusted tube steel is more involved than on newer material.
• Motor compatibility. If your gate has an operator attached, the welding work sometimes requires unbolting and re-mounting the motor. On a DoorKing swing operator or a BFT articulated arm, that’s straightforward. On an older Viking or Elite unit with custom mounting, that’s an extra hour of careful labor. It has to be done right or the motor binds against the gate and burns out.
• Finish matching. After welding, the repair area needs to be ground smooth and repainted, or powder coating needs a touch-up. Matching paint on an older Dallas gate sometimes means a custom mix. We factor finishing into every welding quote, which is something many generalist welders don’t do.
• Permit and HOA considerations. Dallas doesn’t require a permit for gate repair on existing structures, but replacement gates or new installations in historic districts like Swiss Avenue or Munger Place can trigger review. If your HOA has covenants about gate materials, we’ll work with those. It rarely changes price, but it can affect the type of parts used.
• Urgency and scheduling. Same-day emergency welding costs more because the crew has to rearrange the schedule. A non-urgent repair scheduled a few days out costs standard rates. We publish standard rates and emergency rates separately so there’s no surprise.

Common Gate Parts Failures in Dallas

Here’s what we actually replace and weld in this market, in order of frequency:

1. Gate Hinges

Hinges are the single most common parts failure on Dallas gates. The heat and humidity cycle takes a toll on barrel hinges and weld-on strap hinges alike. A typical hinge replacement runs $85 to $220 for a matched set on a residential gate. We carry steel, stainless, and adjustable hinges, and we weld or bolt them depending on your gate’s frame material.

2. Gate Latches and Locks

$65 to $180 gets most Dallas homeowners a new latch, lock, or both. Gravity latches, spring-loaded latches, and keyed locks all wear out eventually. When a latch fails, a gate can swing open in wind or fail to stay closed, which matters if you have dogs, kids, or a pool in the backyard. We’ll fix the alignment, not just swap the part.

3. Cracked or Broken Welds

Dallas heat doesn’t cause welds to crack, but the combination of soil movement and gate weight does. When a weld at a hinge point or a corner joint gives out, the gate starts to sag. Repairing a single cracked weld runs $120 to $350, depending on location and access. Multiple cracks on one gate get a bundled rate. This is where you have to look at whether the gate needs just the weld fixed or needs a full frame reinforcement to prevent recurrence. We’ll tell you straight which one applies.

4. Gate Wheels and Casters

Drive gates over 10 feet wide often ride on a caster wheel to take load off the hinges. Wheels wear flat, bearings seize, and the gate drags across the concrete. Replacement runs $75 to $190 including adjustment. In Dallas, we see a lot of this on double-drive gates in Plano and Allen subdivisions where the concrete has settled and the gate geometry has shifted.

5. Gate Operators and Motor Bearings

This straddles the line between parts and motor repair, but a welding job often touches the motor because the mounting points distort when the gate sags. Carver technicians service all nine major motor brands we work on: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your welding job requires unbolting and re-mounting a motor, we do that in the same visit.

Welding vs. Replacing: The Decision Point

There’s a point in every evaluation where welding doesn’t make financial sense anymore. We’ll run the numbers honestly.

As a rule of thumb: if the total repair cost including parts and welding would exceed 60% of the cost of a new gate, replacement is the smarter move. A new residential steel gate in Dallas runs roughly $900 to $3,500 installed depending on size, material, and ornamentation. If you’re looking at $750 in welding to keep a rusted 40-year-old gate alive, and a new gate costs $1,400, we’ll say so.

That conversation is part of the Carver approach. We’re a gate company. We don’t sell gates from a catalog or push replacement because it’s more profitable. We fix gates that are worth fixing and tell you when they’re not. Lonnie Burke runs this location on that principle. Every tech who works a Dallas job here is background-checked, uniformed, and trained to the same standard we’ve operated under since 2008.

How to Save on Gate Parts & Welding

Here are practical ways Dallas homeowners keep gate repair costs down without cutting corners:

• Fix problems early. A gate that sags a little today becomes a gate with three cracked welds and a burned-out motor in six months. A $150 hinge repair now beats a $900 frame rebuild later. If your gate scrapes the driveway or doesn’t latch, call before it gets worse.
• Get the written price first. At Carver, you get a written price before any work starts. That’s not a sales tactic. It’s how we operate. Knowing the exact number upfront means you can compare against alternatives without guessing.
• Bundle multiple repairs. If your gate has two worn hinges and a sticky latch, doing all three in one visit is cheaper than three separate service calls. The dispatch fee only applies once, and labor billing is more efficient.
• Maintain your gate twice a year. A quick inspection of hinges, wheels, and welds catches problems before they become structural. If you’re on a twice-a-year schedule, you’ll rarely face emergency pricing. If you’re not, call us and we’ll put you on one.
• Use a warranty-backed repair. Cheap welding without a guarantee is expensive when it fails. Carver puts a written guarantee on every repair, good for a full year. If it fails inside that window, the second visit is free. No charge, no argument. That guarantee is called the 365-Day Done Right Promise, and it’s in writing on every job.

For an exact quote on your gate, call (940) 531-9746. Estimates are free, and a live person answers.

What a Carver Gate Parts & Welding Service Visit Looks Like

Here’s the process, step by step, so you know exactly what to expect when we come out:

1. You call. A real person answers the phone at (940) 531-9746. 24 hours a day, 7 days a week. Weekends, holidays, middle of the night. No voicemail queue, no answering service that promises a callback.
2. We talk through the problem. You describe what’s happening. Our dispatcher asks the right questions: gate material, type of failure, whether it moves at all, whether there’s a motor attached. We give you a general range over the phone based on what you’ve told us.
3. A uniformed technician arrives. Background-checked, clean truck, tools and common parts on board. We’ll give you an arrival window before we head your way, and we actually stick to it. That matters when you’re taking time out of your day to meet us.
4. We inspect and write the price. The tech looks at the gate, the frame, the welds, the motor, and the ground around the post. Then you get a written price on the spot. It lists every part, every hour, every line item. That number is fixed. If we get into the job and find something we missed, that’s on us, not on you.
5. We do the work. Welding, parts replacement, motor re-mounting, finish touch-up. The work is done to The Garrison Standard: clean welds, properly aligned parts, no leftover debris. The site looks like we were never there except for the gate working again.
6. You get the guarantee in writing. Every repair comes with the 365-Day Done Right Promise. If it fails within a year, we come back and fix it at no charge. That guarantee is written on the invoice, not buried in fine print.

Why Dallas Homeowners Call Carver for Gate Parts & Welding

Dallas has no shortage of people who weld. Anybody with a truck and a machine can call themselves a gate repair company. What separates Carver is process. Here’s what you get that you don’t always get with a generalist welder or handyman:

• We only work on gates. Gate repair, gate installation, and gate motor repair. That’s the whole business. We’re not also doing fences, gutters, and deck repairs between gate jobs. This focus means we’ve seen every gate failure Dallas can produce, and we know exactly how to fix it.
• Written prices, always. The number you approve is the number you pay. This is a core part of The Garrison Standard, the operating framework we’ve worked under since 2008. Carver Gate Repair Dallas is part of the Garrison Partners family, and every location nationwide adheres to the same standard.
• A full-year guarantee on every repair. Not 30 days. Not 90 days. A full year. And if the repair fails inside that window, the follow-up visit is free. The 365-Day Done Right Promise is in writing on every invoice.
• Technicians you can verify. Every Carver tech is background-checked and uniformed. When we knock on your door, you know who you’re letting onto the property. No mystery subcontractors, no day laborers picked up outside the neighborhood home improvement store.
• A live person answers the phone. Always. If your gate fails at 2 a.m. and you can’t secure your property, you call and a human being picks up. It’s part of The Garrison Code. No call-back queues, no “please listen carefully as our options have changed.”

Our home page has more on how Carver operates across all service areas. If you want more detail specifically on the parts and welding side of what we do, read our Gate Parts & Welding in Dallas page.

FAQs – Gate Parts & Welding Cost

How much does it cost to weld a gate in Dallas?

Most residential gate welding jobs in Dallas run $120 to $350 per weld point, with most homeowners paying between $250 and $700 for a typical sagging gate repair that includes reinforcement. The final number depends on how many welds are needed, the gate’s material, and how accessible the work area is. Call (940) 531-9746 for a written quote specific to your gate.

Is it cheaper to repair or replace a gate?

If repair costs stay under 60% of replacement cost, repair is usually the better value. A new residential steel gate in Dallas costs roughly $900 to $3,500 installed. If your repair estimate comes in at $750 on a gate that would cost $1,400 to replace, we’ll recommend replacement and explain why. You can call (940) 531-9746 and we’ll walk you through the math honestly.

How much does a new gate hinge cost in Dallas?

A matched set of residential gate hinges runs $85 to $220 installed in Dallas, including welding or bolting and alignment. Standard steel barrel hinges sit at the low end; heavy-duty ornamental iron hinges run higher. We carry hinges on the truck for most common gate types.

Can you fix a sagging gate without replacing it?

Yes, in most cases. A sagging gate repair, which includes welding reinforcement and installing an anti-sag frame kit, runs $250 to $700 in Dallas. Gates that have sagged for years and rusted through their frame may not be salvageable. We’ll tell you directly if repair isn’t worth your money. Call (940) 531-9746 for an assessment.

How fast can you come out for emergency gate welding in Dallas?

Same-day service is available for Dallas calls placed before early afternoon, and we answer the phone 24/7 for emergencies. Emergency pricing is published separately from standard rates, and you’ll see the total in writing before we start. If your gate is hanging off its hinges or the property can’t be secured, call (940) 531-9746 now and a live person will get you scheduled.

Do you guarantee your welding work?

Yes. Every Carver Gate Repair Dallas repair comes with a written guarantee good for a full year. If the weld fails or the part fails within twelve months, we return and fix it at no charge. No argument, no diagnostic fee, no fine print. That’s the 365-Day Done Right Promise, and it’s on every invoice we write.

Call Carver Gate Repair Dallas for a Free Estimate

If your gate needs parts, welding, or just a professional opinion, call (940) 531-9746. You’ll get a live person on the phone, an honest assessment, and a written price before any work begins. We’ve served Dallas since 2008 under The Garrison Standard, and we’re the crew that shows up squared away. No moving prices at the door. No leaving a mess behind. Just a gate that works and a guarantee in writing.

Pricing reflects the Dallas market as of 2026. Carver Gate Repair Dallas offers free estimates – call (940) 531-9746.

Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Dallas since 2008.