Frequently Asked Questions - Gate Repair in Dallas, TX
Straight answers to the questions Dallas homeowners ask us most about gate repair, replacement, and automation. If you don't see your question, call (940) 531-9746 and ask us directly.
Pricing & Cost FAQs
Gate repair in Dallas typically runs between $150 and $800, with most common fixes like hinge replacement, weld repair, or sensor alignment landing in the $200 to $450 range. The final number depends on the gate's size, material, and what actually failed. A bent steel frame costs more than a misaligned safety sensor. We give every customer a written price before any work starts, so the number you approve is the number you pay. Call (940) 531-9746 for a free estimate at your property.
A new automatic gate opener in Dallas usually costs between $1,200 and $3,500 installed, depending on the opener's duty rating, the gate's weight, and whether we're adding new safety edges or a keypad. Lighter residential swing gates land on the lower end. Heavier steel or ornamental gates with a high-cycle operator like FAAC or BFT equipment run higher. We quote the equipment, labor, and any electrical work as one written price before we touch anything. Call (940) 531-9746 and we'll measure and price it free.
Gate welding repair in Dallas generally costs $150 to $500, depending on the crack length, metal thickness, and whether we need to reinforce the hinge plate or patch a rusted section. A simple cracked weld on a driveway gate might take under an hour. A sagging corner with rot through the bottom rail takes longer and costs more. We grind the area clean, weld it hot, and paint or prime the repair so it doesn't rust out again next season. Call (940) 531-9746 for a written quote.
No, we don't charge for estimates anywhere in the Dallas area. We come out, look at the gate, check the operator and the hinges, and write up a price for the repair or replacement. That written price covers everything: parts, labor, and any adjustment work after installation. You approve it before we start, and we don't add surprise line items at the end. If the gate isn't worth fixing, we'll tell you that too and price a replacement instead. Call (940) 531-9746 to schedule a free estimate.
Converting a manual gate to automatic in Dallas typically costs $1,800 to $4,500, including the operator, safety sensors, control board, and installation. The spread comes down to gate weight, power availability at the gate, and whether we're running new conduit from the house or garage. We handle the full conversion as one job: bracket mounting, opener installation, safety edges, and programming. Every conversion gets a written price before work begins. Call (940) 531-9746 and we'll measure your gate and quote the whole job free.
Service & Process FAQs
We arrive inside the window we gave you, walk the gate with you, and find out what's actually failing before we quote anything. Then we give you a written price for the repair, the parts, and the labor. Once you approve it, we do the work by the book, test the full open and close cycle several times, and clean up after ourselves. Before we leave, the gate opens and closes every time. That's the standard. Call (940) 531-9746 to get on the schedule.
It depends on what's wrong and what's on the schedule that day. Simple issues like a misaligned safety sensor, a dead remote battery we can replace, or a hinge that needs tightening can often be handled in a single visit. Bigger failures, like a broken operator arm or a welded repair on a heavy steel gate, may need parts ordered or fabrication time. We serve Dallas, Irving, Carrollton, Mesquite, and surrounding areas Monday through Friday from 7:00 AM to 7:00 PM and Sunday from 7:00 AM to 7:00 PM. Call (940) 531-9746 early and we'll tell you honestly what we can do that day.
Most gate repairs in the Dallas area take between one and three hours on site. A hinge replacement or a sensor realignment is usually done in about an hour. A weld repair with grinding and repainting might take two. A full operator replacement is more of a half-day job, and a new gate installation with concrete work can run a full day or into the next. We give you a realistic time window when we quote the job. Call (940) 531-9746 and we'll tell you what to expect for your specific gate.
We cover Dallas and the surrounding cities, including Irving, Carrollton, Mesquite, DeSoto, Lancaster, University Park, Red Oak, Lakewood, Far North Dallas, Highland Park, and Lake Highlands. Driveway gates, pedestrian gates, apartment entry gates, and commercial gates all fall in our service area. The Dallas clay soil shifts with the seasons, and that movement throws gate posts out of plumb over time, which is one of the most common calls we run in this market. Call (940) 531-9746 to confirm your address is in our service area.
We work on steel, wrought iron, aluminum, chain link, and wood gates across Dallas. That includes swing gates, slide gates, cantilever gates, and pedestrian gates. We also service the automation side: operators, remote controls, keypads, loop detectors, and safety edges. North Texas heat and rain cycles are hard on gate hardware, and we see a lot of rusted hinge welds and sun-baked control boards in neighborhoods like Lakewood and Far North Dallas. Call (940) 531-9746 with what you've got and we'll tell you if it's fixable and what it'll take.
Brands & Parts FAQs
We service FAAC, BFT, Linear, and Viking operators, along with most other residential and light commercial brands installed across the Dallas market. FAAC and BFT are common on higher-end driveway gates in Highland Park and University Park. Linear shows up frequently on suburban swing gates in Carrollton and Mesquite. Viking is common on apartment entry gates. If your operator isn't one of those, call (940) 531-9746 and we'll let you know if we stock or can order parts for it.
We stock common replacement parts: safety sensors, remote controls, keypads, control boards, hinge bolts, and capacitor kits. When your opener fails in Dallas, it's usually the control board or a burned capacitor, not the motor itself. Having the common parts on hand means we can fix a lot of openers in one visit without ordering and returning. Less common parts take a few days to source. Call (940) 531-9746 and we'll tell you if your repair is a same-visit fix.
Sometimes, but not always. If we're replacing your opener with the same brand, like swapping one FAAC for a newer FAAC model, your existing remotes may program right in. If we're changing brands, like moving from Linear to BFT, the old remotes generally won't cross over and you'll need new ones. We'll tell you before any work starts whether your remotes and keypad will carry over or need replacing. Call (940) 531-9746 and we can check compatibility for your specific setup.
Intermittent gate operation in Dallas usually comes down to three causes: a safety sensor drifting out of alignment, a weak battery in the remote, or a control board starting to fail as it heats up. North Texas summers cook control boards in direct sun, and we see intermittent failures first, before the board quits entirely. It's worth having it checked before it strands you on the wrong side of the gate. Call (940) 531-9746 and we'll diagnose it. A written quote covers whatever we find.
Licensing & Insurance FAQs
Carver Gate Repair is a local branch of the Garrison Partners family, and every pro working under our name is required to hold the license and insurance their state requires. When we send a crew to your property in Dallas, Irving, or Mesquite, you're getting someone who works to The Garrison Standard: show up inside the window, price in writing before any work starts, do it by the book, and stand behind the work for a full year. Call (940) 531-9746 and we'll walk you through what credentials apply to your job.
Most gate repairs in Dallas don't require a permit, since replacing hinges, welding a cracked rail, or swapping an operator is maintenance on existing equipment. A brand-new gate installation with new posts set in concrete can require permitting depending on your city's rules, particularly in incorporated cities like University Park or Highland Park. We'll tell you during the estimate whether your job needs a permit and what that process looks like. Call (940) 531-9746 to get started.
When you call (940) 531-9746, a live coordinator answers and gets you connected with the local Dallas team. They'll take your address, ask what the gate is doing or not doing, and schedule a visit. You're not getting a recording or a menu tree. The coordinator writes up your notes so the technician shows up already knowing what to look for. Call (940) 531-9746 during business hours and you'll talk to a person, not an automated system.
Emergency & Response FAQs
A true gate emergency is a gate that's stuck open and can't be secured, or a gate that's stuck shut and blocking your vehicles in or out. A gate that fell off its track, a broken hinge that's dropped the gate onto the driveway, or an opener that's grinding and the gate won't move manually all count. Loud grinding with smoke is an electrical fault and you should cut power to the opener at the breaker. Call (940) 531-9746 right away and describe what happened. We'll tell you if it can wait or needs immediate attention.
We're open Monday through Friday from 7:00 AM to 7:00 PM and Sunday from 7:00 AM to 7:00 PM, and we serve the whole Dallas area including Carrollton, DeSoto, Lancaster, and Lake Highlands. Same-day availability depends on the schedule and what's actually wrong with the gate. A broken weld usually can't be done same day because the metal has to cool properly. A sensor realignment often can. Call (940) 531-9746 early in the day and we'll give you an honest answer about when we can get there.
First, check if the opener has a manual release, usually a pull handle or key on the operator itself. That disengages the motor and lets you push the gate by hand. If the gate is too heavy or jammed against something, don't force it. Forcing a stuck gate can bend the frame or tear the hinge welds out, and high-tension springs under load can be dangerous to release by hand. Call (940) 531-9746 and we'll get someone out to free the gate and assess the damage. Write down what you were doing when it failed, that speeds up the diagnosis.
Warranty & Guarantees FAQs
Every repair and installation we do in Dallas is covered by The Garrison Standard guarantee in writing for a full year. If the work fails in that time, we come back and make it right at no charge. That covers the parts we installed, the welds we made, and the labor we did. It doesn't cover damage from a vehicle hitting the gate, storm damage, or someone else working on the equipment after we leave. The warranty terms are on your written quote. Call (940) 531-9746 if something isn't right and we'll honor it.
If the same repair fails within the one-year warranty period, call (940) 531-9746 and we'll come back and fix it at no charge. If something different has failed, like a new crack in a different spot or a control board that was fine during the first visit, that's a new repair and we'll price it in writing before we touch it. We don't play games with the warranty. The Garrison Standard means we stand behind the work for a full year, plain and simple.
The one-year warranty on our Dallas gate repairs stays with the property, not the person who wrote the check. If you sell your home in Lakewood or Far North Dallas and the new owner has a covered failure within the warranty period, we'll honor it. Keep the written quote or invoice with your closing documents and pass it along. If you're buying a home with a recently repaired gate, call (940) 531-9746 and we can check the repair history for your address.
Some things you can handle: tightening loose hinge bolts, cleaning the safety sensor lenses, replacing remote batteries, clearing leaves away from the track. But anything involving high-tension springs, welded frames, electrical control boards, or a gate that's come off its track should be left to a trained professional. Gate springs under load can release with enough force to cause serious injury, and a 400-pound steel gate falling is not something you want to be under. If it's more than a battery or a wipedown, call (940) 531-9746 and let us look at it.
Written by Lonnie Burke, the local team lead at Carver Gate Repair, serving Dallas since 2008.
Still Have Questions?
We are happy to help. Call us - same-day and after-hours emergency service available.
(940) 531-9746