Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateElite Gate Installation in Dallas: What to Know First
Elite gate installation in Dallas typically runs $1,800 to $6,500 depending on the gate style, size, and whether you need a new operator or just the gate itself. We install Elite driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates as an independent Elite service provider, which means we work on the equipment without being tied to manufacturer pricing or scheduling. Most Dallas installations are quoted within 24 hours and scheduled within five to ten business days, depending on material availability and whether concrete work is involved.
This page is for Dallas homeowners who already own Elite equipment or are considering it, and who want a straight answer about what installation actually involves before anyone steps onto the property. If you’d rather skip the reading, call (940) 531-9746 and we’ll walk you through it.
How Elite Products Fail – and How We Fix Them
Elite gates are generally well-built, but we see the same failure patterns across the Dallas metro area often enough to plan for them before the first bolt comes out. Here’s what shows up most:
- Elite SL3000 slide gate roller trucks wearing unevenly. The SL3000 series is a common slide operator in Dallas, and its roller trucks take a beating from the clay-heavy soil shift we get around Lakewood and East Dallas. When the track settles even a quarter inch, the rollers wear on one side, the gate starts dragging, and the motor works harder until it trips. We check track level before touching the operator, because no new motor survives a crooked track.
- Elite CSW200 swing operators with stripped limit cams. The CSW200 runs off mechanical limit cams that tell the operator where the gate stops. When these strip or slip, the gate slams at the end of travel instead of stopping clean. In neighborhoods like Preston Hollow, where double swing gates are common, we see this after a few hard years of Dallas wind loading. The fix is either a cam replacement or a conversion to a magnetic limit setup, and we’ll quote both options.
- Elite pedestrian gate hinges seized from irrigation overspray. Sprinkler heads aimed at pedestrian gates are a Dallas staple, and the result is hinge pins that corrode and bind. This kills swing operators fast because they’re pulling against friction they were never sized for. We replace the hinges with sealed-bearing versions and re-aim the sprinkler head while we’re there. The operator usually recovers once the gate swings freely again.
- Elite photo eye misalignment on double gate setups. Dual swing gates on Elite systems use a through-beam photo eye that has to stay aligned across the full opening. Wind, gate sag, or a stray trash can knocks it out of line, and the gate refuses to close. Owners call thinking the motor’s dead. We realign the eyes, shim the post if it’s shifted, and verify the close cycle ten times before we leave.
- Elite control board failures after Dallas thunderstorms. We get a lot of calls after big storms pass through North Dallas and Richardson, and the pattern is almost always the same: a nearby lightning strike took out the control board’s relay. Elite boards don’t always play well with surge protection that isn’t sized for the amperage the operator pulls. We install inline surge suppression on every new Elite install, and we keep replacement boards in stock for the most common Elite series.
Styles & brands we work with
Our Elite Gate Installation Process
- 1
Call and schedule. A live person answers, even at 2 a.m. We set a two-hour arrival window and our technician calls when they’re 20 minutes out.
- 2
Site walk and measurement. Lonnie or one of our technicians walks the property with you, checks gate weight, post condition, concrete depth, and power availability. Every Elite gate needs a dedicated circuit, and we verify that before quoting anything.
- 3
Written price before work starts. The number covers the gate, the operator, any concrete work, wiring, and cleanup. It doesn’t move once you approve it. You’ll know the exact total before we unload a single tool.
- 4
Installation and parts decision. We use OEM Elite parts when the job calls for them and quality aftermarket parts when they’re actually the better choice for a Dallas home. We’ll tell you which is which and why, and we won’t put a cheap actuator on a heavy gate to hit a lower number.
- 5
Testing and adjustment. Limits, force settings, photo eyes, and loop detectors get tested through full open and close cycles until the gate runs smooth. Then we test it again with weight on it, because that’s what catches the stuff showroom testing misses.
- 6
Cleanup and the written guarantee. We leave the site the way we found it, walk you through the operation, and hand you the guarantee in writing. It covers our installation work for a full year. If something goes wrong inside that window, the second visit is free. No charge, no argument.
See the difference
Before
After
Before
After
Before
AfterWhat Elite Gate Installation Costs in Dallas
Here’s what we’re quoting on Elite jobs right now:
| Job | Typical Dallas Range |
|---|---|
| Elite pedestrian gate, installed | $1,800 – $3,200 |
| Elite single swing driveway gate, no operator | $2,500 – $4,800 |
| Elite double swing driveway gate, no operator | $4,500 – $6,500 |
| Elite slide gate with SL3000 operator | $3,800 – $5,900 |
| Operator only, labor and parts | $1,400 – $2,700 |
What moves the price: gate weight (steel versus aluminum versus wrought iron), post condition and whether new posts have to be set, power run distance from the panel, and whether you want access control like a keypad or vehicle loop detector. Every quote is line-itemed and delivered in writing before approval. Call (940) 531-9746 and we’ll get you an exact number.
Why Dallas Homeowners Call Carver Gate Repair Dallas for Elite Work
We work on nine gate-motor brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, which matters when you’re on the fence between Elite and another system. Our techs can tell you honestly how Elite compares to DoorKing or Ghost Controls for your specific gate, because we work on all of them every week. Every visit includes a written price before anything gets touched, a background-checked and uniformed technician, and a full-year written guarantee on the work. The Garrison Standard has been the same since 2008: show up, tell the truth, write the number down, and stand behind it. Lonnie Burke figures a homeowner’s time is worth something too, which is why we diagnose before we quote and clean up before we leave.
FAQs
Yes, we install Elite driveway gates, pedestrian gates, slide gates, swing gates, double gates, and security gates throughout Dallas as an independent Elite service provider. We are not affiliated with or authorized by Elite, which means our recommendations and pricing stay independent. Call (940) 531-9746 for a free estimate and we’ll schedule a site walk.
A full Elite gate installation includes the gate itself, the operator if you want one, the posts or post repair, any concrete work, the power run, photo eyes or safety edges where required, and cleanup. You get a written price covering all of it before any work starts. If you already have a quote from another company, bring it and we’ll tell you what’s included and what they might be leaving out.
Most single gate installations are done in one day, though a double swing gate with new posts and a fresh concrete pour can take two to three days including cure time. We’ll give you a firm schedule in the written quote, and the technician will confirm the arrival window the morning of the job.
It depends on the part. For control boards, limit switches, and safety sensors, we use OEM Elite parts because the tolerances matter. For things like roller trucks, hinges, and some hardware, a quality aftermarket part can be better suited to Dallas soil and weather conditions, and it typically costs less without cutting lifespan. We’ll show you the difference on the quote, and you decide before we order anything.
Installation is scheduled work, not same-day dispatch. We respond to emergency gate failures quickly, but a new Elite gate installation requires measurement, parts ordering, and a scheduled crew. Most installations are scheduled within five to ten business days of the site walk, and we’ll hold that window unless materials run late. Call (940) 531-9746 and we’ll put you on the schedule.
Generally, manufacturer warranties on Elite parts stay intact as long as the installation follows the manufacturer’s specifications, which we do. Our installation labor is covered separately by our own written 365-Day Done Right Promise, so you’re protected on the workmanship regardless of the manufacturer’s position. We document every install with photos and notes in case a warranty claim ever comes up.
Written by Lonnie Burke, Owner, Carver Gate Repair Dallas at Carver Gate Repair Dallas, serving Dallas and nearby areas.