Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Far North Dallas, TX
Carver Gate Repair is the gate company Far North Dallas homeowners call when a driveway gate stops opening, a motor burns out, or a post shifts after a dry summer. Far North Dallas gates carry more weight than most: ornamental iron on 1970s custom estate lots, automated aluminum on zero-lot-line builds from the 1990s, and expansive clay soil under nearly all of it. That combination means sagging hinges, misaligned sensors, and opener failures show up here more often than in neighboring cities with more stable ground. Call (940) 531-9746 and a live person answers, any hour, any day.
Why Far North Dallas Homes Are Different
Far North Dallas sits on some of the most expansive clay soil in North Texas. When a dry summer pulls moisture out of the ground, the clay shrinks and pulls away from gate posts. When rain returns, it swells and pushes back. Posts set without deep concrete piers lean, sometimes within a single season, and a leaning post binds an automatic opener until the motor strips or the control board overheats. We see this on nearly every older estate gate we open up.
The housing stock adds a second layer. Much of Far North Dallas was built between the 1970s and 1990s: custom homes on large lots with heavy steel or wrought iron driveway gates, plus newer developments with automated aluminum gates and retrofitted openers. Original equipment from that era often still runs, paired with newer motor brands like LiftMaster or FAAC. Hot summers expand the metal. Occasional winter freezes contract it. The cycle cracks welds, loosens hinge bolts, and throws sensors out of alignment. Spring thunderstorms bring another failure point: low-voltage wiring and control boards shorting out after heavy rain works into junction boxes. A gate company working here has to understand all of it, not just swap parts.
Styles & brands we work with
Our Main Far North Dallas Services
Most Far North Dallas calls fall into three jobs: repairing a gate that has stopped working, installing a new gate on a new build or replacement, and repairing or replacing the motor that drives an automatic system. Each has its own page with detailed pricing and local conditions.
Gate Repair in Far North Dallas
Gate repair here usually means one of three things: a post that has moved, a hinge that has sagged, or a sensor that no longer lines up. On Far North Dallas clay, the post is often the root cause, and fixing the gate means resetting the post before touching the hinges or the opener. We quote the full repair in writing before any work begins, including what it will take to get the post stable again. Gate Repair in Far North Dallas covers typical costs, timelines, and what a repair involves.
Gate Installation in Far North Dallas
New gate installation in Far North Dallas is measured work, not a same-day job. The process starts with a site visit to check soil conditions, post depth requirements, and what the driveway layout will allow. The expansive clay here means post footings need to go deeper than a contractor from a city with stable soil would bother with. After that, the gate is built or ordered, the operator is matched to the gate’s weight and swing distance, and installation is scheduled. Gate Installation in Far North Dallas explains what a full installation includes and what it typically costs.
Gate Motor Repair in Far North Dallas
When a gate motor fails in Far North Dallas, the first question is whether the motor failed on its own or was pushed to failure by a binding gate. A motor that strains against a shifted post burns through limit switches and control boards faster than one on a gate that swings freely. Our technicians diagnose the motor and the alignment before recommending a repair or replacement, and every repair carries a written one-year guarantee. Gate Motor Repair in Far North Dallas breaks down common motor failures and replacement costs by brand.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Far North Dallas
We work on the systems already installed across Far North Dallas, including LiftMaster, FAAC, and Elite operators. Parts for these brands are stocked on our trucks, which cuts the time between diagnosis and a working gate substantially. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Far North Dallas, TX
| Service | Typical range in Far North Dallas |
|---|---|
| Gate repair, minor (hinge, latch, alignment) | $150 – $350 |
| Gate repair, structural (welding, post reset) | $400 – $900 |
| Gate installation, single ornamental iron | $2,400 – $5,500 |
| Gate installation, automated aluminum | $3,500 – $8,000 |
| Gate motor replacement, basic swing operator | $850 – $1,600 |
| Gate motor replacement, heavy-duty slide operator | $1,900 – $3,800 |
| Limit switch replacement | $175 – $350 |
| Loop detector replacement | $250 – $475 |
| Control board replacement | $350 – $750 |
| Full system diagnostic | $95 – $165, applied toward repair |
Two things push Far North Dallas prices toward the higher end: post work on expansive clay, which requires deeper footings and occasionally re-welding, and heavier-than-average gates built from ornamental iron. Every job is quoted in writing before work starts, so the number does not move once the job is open.
Neighborhoods We Serve in Far North Dallas
We cover the full Far North Dallas area, including the gated estate communities and the neighborhoods around the Addison border. Response time across this service area is typically same-day for repairs, with emergency dispatch available around the clock.
- Preston Hollow and surrounding estate neighborhoods
- Bent Tree
- Northwood Hills
- Hillcrest Forest
- Addison border communities
Service Area – Cities Near Far North Dallas
Our Far North Dallas crews also handle gate work in the surrounding metro. We serve Dallas, TX, Irving, TX, Carrollton, TX, and Mesquite, TX. Dispatch is coordinated from our Dallas-Fort Worth office, with technicians dispatched locally across the service area.
Serving Far North Dallas, TX - Our Local Coverage Area
We’re based in the Far North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Far North Dallas
Same-day service is standard for repair calls in Far North Dallas. We keep trucks and technicians staged across the area, and phones are answered by a live person 24/7, so a call at any hour gets a real response. Call (940) 531-9746 and we will give you an arrival window, not a call-back time.
Most gated communities and many single-estate HOAs in Far North Dallas require approval before a gate is replaced or significantly altered. Repairs usually do not require it. We recommend checking your HOA’s covenants before scheduling an installation, and we can provide the spec details your architectural committee will ask for.
The price is written and agreed before any work begins. If we open the gate and find something unexpected, we stop and discuss it with you before doing anything that would change the quote. The price does not move at the door, and the written guarantee covers the repair for a full year.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Far North Dallas Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.