Sliding driveway gates
Wrought iron
Wood & steel frame
Farm & ranch
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in Dallas, TX
A driveway gate in Dallas does two jobs at once: it controls who gets onto your property, and it tells anyone driving by that the house behind it is not an easy target. We provide Gate Installation services for swing gates, slide gates, and the operators that move them, on driveways from Preston Hollow to Lake Highlands to Kessler Park. When a gate is installed right, on good posts, with the motor matched to the gate’s weight and width, it works for years without much thought. When it’s installed wrong, it sags, binds, and eats motors. That’s the difference we focus on.
If you’re still deciding whether a gate fits your property, our Gate Installation page walks through the full scope, including site prep, materials, and motor selection. This page deals with the driveway gate itself: which type suits a Dallas lot, what it costs, and how we put it in. Call (940) 531-9746 any time. A live person answers, day or night.
Key Takeaways
- A standard single swing driveway gate in Dallas typically runs $2,800 to $6,500, installed, depending on material and motor.
- Slide gates cost more: $4,500 to $9,000, because they need a steel track, a heavier frame, and more site prep.
- Wed get the price in writing before the first tool comes off the truck. That number does not move.
- Every driveway gate install is covered by a written one-year guarantee, the 365-Day Done Right Promise.
- We work on FAAC, BFT, Linear, and Viking operators, among others, so the motor we quote matches the gate we build.
When You Need Driveway Gate
Some homeowners come to us with a clear picture of what they want. Others have lived with a problem long enough that they just want it solved. These are the situations we see repeatedly in Dallas:
- You back onto an alley. East Dallas and Oak Cliff lots often have alley access behind the house. A driveway gate across the rear entry closes off the easiest way in for anyone scouting backyard sheds, garages, or open carports.
- You’ve had a package or vehicle break-in. After the first incident, a gate becomes less about curb appeal and more about simply being left alone. We hear this from homeowners in Lakewood and the M Streets more than anywhere else.
- You run a home office or workshop. If clients, couriers, or employees come and go, a gate with a keypad or phone-based entry gives you a record of who came in and keeps the driveway from becoming a public parking lot.
- You’ve got a pool. A driveway gate is not a substitute for a pool fence, but it does add a layer between the street and the backyard. Several Dallas-area insurance carriers notice.
- Your current gate is failing. Maybe the wood is rotting at the base where water collects after North Texas thunderstorms. Maybe the motor struggles in the July heat. If the gate is over 12 to 15 years old, we generally tell homeowners it’s more cost-effective to replace the whole system than to patch it piecemeal.
- You bought a house with a broken gate. It happens constantly in older Dallas neighborhoods. The previous owner left a gate that doesn’t close, and the new homeowner inherits a morning project they never asked for.
Our Driveway Gate Process
Here’s how a driveway gate install goes with Carver Gate Repair Dallas, from first call to final walkthrough:
- Call and talk to a person. You reach our office at (940) 531-9746. We ask about your driveway width, the gate you have or want, and what’s driving the project. We’ll schedule a site visit at a time that works for you.
- Site measurement and assessment. Lonnie Burke, or one of our senior technicians, comes out to the property. We measure the driveway opening, check the grade of the land, look at where power will come from, and note any drainage issues. For slide gates, we check side clearance. For swing gates, we check the arc of travel and any slope at the hinge point.
- Written quote. You get a line-item price before any work starts. It covers the gate, the motor, the posts, the electrical run, the control hardware, and the labor. The number on that document is the number you pay. If we hit something unexpected under the concrete, we stop, tell you what we found, and give you a new written price before proceeding. No surprises at the door.
- Installation day. Our crew arrives in uniform, on time, with the materials pre-staged. We set posts at the correct depth for Dallas soil, hang the gate, mount the operator, run the electrical to code, and program the entry controls. We clean up the site when we’re done, down to the last wire tie.
- Testing and walkthrough. We run the gate through full open and close cycles, test the auto-reverse and safety sensors, and make sure the manual release works. Then we walk you through how to use the keypad, remote, or app before we leave.
- Written guarantee. Every install comes with the 365-Day Done Right Promise, in writing. If anything fails within a year of service, we come back and fix it. No charge, no argument.
Driveway Gate Pricing in Dallas
We publish ranges because homeowners deserve to arrive at the decision knowing roughly what they’re dealing with-see our guide on How Much Does Gate Installation Cost? (2026 Price Guide) - Dallas, TX for more detail. Driveway gate pricing in Dallas depends on four things: gate material and size, motor type, site work, and the access system. Here are the honest numbers we see across the metro:
- Single swing gate, steel or aluminum, residential operator: $2,800 to $5,200 installed
- Double swing gate, steel or aluminum, residential operator: $4,200 to $7,500 installed
- Slide gate, steel frame with aluminum or wood infill: $4,500 to $9,000 installed, depending on track work and motor
- Motor and operator only, on an existing gate: $850 to $2,400 installed, depending on brand and duty cycle
- Keypad, intercom, or phone-based entry system: $300 to $1,200 added to the install
A few local cost factors in Dallas are worth knowing. First, the soil. In areas with heavy clay, like Garland and Mesquite on the east side, posts need deeper footings to stop frost heave and shifting. That adds a few hundred in concrete and labor, and it’s worth every dollar. Second, heat matters for motor choice. Operators in direct West-facing sun all afternoon run hotter, so we often spec a motor with a higher duty cycle for those lots. Third, permit requirements in the City of Dallas depend on the height and location of the gate relative to the right-of-way. We handle that paperwork as part of the job.
Every quote includes a written price before work begins. If you call (940) 531-9746, we’ll come out, measure, and put the number on paper. There’s no cost for the estimate.
How We Match the Motor to the Gate
The operator is the part most likely to fail if it’s undersized. So we match it deliberately:
- FAAC operators are a solid choice for residential swing gates up to about 18 feet wide. They’re built for frequent cycles and handle the North Texas wind well.
- BFT makes operators with a reputation for smooth starts and stops, which matters on heavier ornamental steel gates where a hard stop can crack a hinge over time.
- Linear is the default we often recommend for slide gates on longer driveways where reliability over years of daily cycling matters more than quiet operation.
- Viking operators are on the higher end of the duty cycle range. If your gate serves a long driveway with multiple vehicles a day, Viking is worth the extra cost.
We train on all of these brands plus five more, so we don’t push one brand because it’s all we know. The gate’s weight, width, cycle frequency, and sun exposure decide the motor.
FAQs – Driveway Gate
How much does a driveway gate cost in Dallas?
A single swing driveway gate in Dallas typically costs $2,800 to $5,200 installed, and a slide gate runs $4,500 to $9,000, depending on material, motor, and site work. Wood gates cost less than steel up front but need more maintenance in Dallas humidity, which evens out the lifetime cost. Call (940) 531-9746 for a written quote; the estimate is free and the number doesn’t move once it’s on paper.
Can you install a driveway gate on a slope?
Yes. Sloped driveways are common in Hilltop and parts of North Dallas, and they change the gate design. Swing gates need the hinge post set so the gate clears the high side of the grade; Pedestrian Gate and slide gates may need the track elevated or the gate built with a stepped bottom edge. We measure the grade during the site visit and account for it in the written price you receive before work starts.
Is it cheaper to repair or replace a driveway gate?
If the posts are solid, the gate frame is straight, and only the motor or a hinge has failed, repair is cheaper, often $200 to $600. If the gate is sagging, the wood is rotten, or the posts have shifted, replacement makes more sense, because the same failures will repeat. We give you an honest assessment either way, and the quote reflects what the gate actually needs, not what’s easiest for us to sell.
Can you come today to install a driveway gate?
Emergency gate repairs can often be handled same day. Full driveway gate installations require a site measurement and a scheduled install date, typically a few days to two weeks out depending on material lead times. Call (940) 531-9746 and a live person will give you the next available appointment, even if it’s a weekend or holiday.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Dallas.