Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterElectric Gate Repair in Dallas, TX
Electric gate repair in Dallas typically runs between $175 and $600 for most service calls, with motor replacement ranging from $450 to $1,400 depending on the operator type and gate size. Most repairs are completed in a single visit, and we dispatch technicians across the Dallas metro area including Preston Hollow, Lake Highlands, Oak Cliff, and the Park Cities. If your gate won’t open, moves erratically, or makes a grinding noise when it cycles, call (940) 531-9746 and a live person will answer, day or night.
Carver Gate Repair Dallas specializes exclusively in electric gate systems. We’re not a general handyman service that happens to glance at a gate between fence posts and concrete pours. Our technicians are trained on FAAC, BFT, Linear, and Viking operators, among others, and we follow the same Gate Repair process on every job: written pricing before work begins, background-checked technicians in uniform, and a full-year written guarantee on every repair.
Electric gates fail for predictable reasons: a limit switch that drifted out of adjustment, a loop detector that stopped reading the vehicle, a capacitor that gave out after years of Dallas heat. Our job is to identify the actual fault, explain it in plain language, and fix it without inventing problems that don’t exist. That’s The Garrison Standard, and it’s how we’ve operated every location since 2008.
When You Need Electric Gate Repair
Some gate problems announce themselves loudly. Others are quieter but no less real. Here are the scenarios we see most often in Dallas neighborhoods:
- The gate won’t open or close at all. This is usually a power issue, a failed capacitor, or a control board fault. In older systems we see a lot of failed thermal fuses after summer lightning storms in north Texas.
- The gate opens but won’t stay open, or closes too quickly. This often points to a misadjusted limit switch or a photo-eye that’s been bumped out of alignment. It’s a safety concern, not just an annoyance.
- The motor hums but nothing moves. That hum is usually the capacitor trying to start the motor and failing. Replacing the capacitor is a quick fix; ignoring it burns out the motor.
- The gate grinds, squeals, or bangs during operation. Worn rollers, dry bearings, or a chain that’s lost tension. Left unattended, those sounds turn into welded brackets and bent rails.
- The keypad or remote stopped working. We’re often able to reprogram existing remotes and keypads rather than selling replacements, and if a replacement is needed, we carry common Linear and Viking remotes on the truck.
- The gate only works halfway, or reverses without cause. In Dallas, we see this most with slide gates whose rails have shifted in soggy clay soil after heavy spring rain.
If you’re seeing any of these, call us at (940) 531-9746. We’ll give you a straight answer about what’s likely happening and when we can get there.
Our Electric Gate Repair Process
We run every repair on a defined process. No improvising, no “we’ll see what it looks like when we get there.” You know what’s happening at each step.
- You call and a live person answers. Not an answering service, not a voicemail queue. A real person takes your information, asks a few questions about the gate’s symptoms, and schedules the visit. Calls are answered 24/7, including weekends and holidays.
- We arrive in a window we committed to. Our technician shows up in uniform, with identification. You know exactly who is on your property before they touch anything.
- We diagnose and write the price down. The technician explains what’s wrong in plain terms, shows you the failed part when it’s visible, and hands you a written price before any work starts. That number does not move. Written prices are part of The Garrison Code, and they’re non-negotiable on every job.
- We complete the repair and test the full cycle. The gate gets opened and closed multiple times, the safety sensors are verified, and the limit settings are confirmed. We don’t call a repair done until the gate operates the same way it did when it was new.
- We walk you through the repair and leave the site clean. We show you what was replaced, explain what to watch for going forward, and clean up after ourselves. Then we hand you the written guarantee.
If anything fails within the guarantee period, we come back and fix it at no charge. That’s the 365-Day Done Right Promise, in writing, on every repair.
Electric Gate Repair Pricing in Dallas
We publish price ranges because homeowners deserve to arrive at the decision knowing what a repair typically costs. These are Dallas market rates for common electric gate repairs, and they reflect what we charge:
| Repair Type | Typical Price Range |
|---|---|
| Gate operator diagnostic fee (applied to repair) | $75 – $125 |
| Limit switch adjustment or replacement | $125 – $250 |
| Capacitor replacement | $95 – $180 |
| Photo-eye realignment or replacement | $110 – $220 |
| Control board replacement | $275 – $650 |
| Swing arm operator replacement (parts + labor) | $550 – $1,100 |
| Slide gate motor replacement (parts + labor) | $650 – $1,400 |
| Full gate operator installation, new system | $1,800 – $3,500 |
What affects the price: the type of operator (swing vs. slide), the gate’s weight and length, whether the existing wiring is salvageable, and the brand of equipment already installed. A Viking swing operator on a 12-foot gate is a different job than a BFT slide motor on a 30-foot commercial-style driveway gate. We work on both.
We don’t charge by the hour. You get a written price before work starts, based on the repair not the clock. Estimates are free. Call (940) 531-9746 and we’ll tell you what your specific repair is likely to cost.
FAQs – Electric Gate Repair
How much does electric gate repair cost in Dallas?
Most electric gate repairs in Dallas run between $175 and $600 for a single-visit fix, with full motor replacements ranging from $450 to $1,400. The final price depends on the operator type, gate size, and which component failed. We give you a written price before any work starts, so there are no surprises at the end of the job. Call (940) 531-9746 for a free estimate specific to your gate.
Can you repair an electric gate the same day?
We reserve same-day and next-day slots for urgent repairs across Dallas, including security gates that won’t close and gates that have trapped vehicles inside. When you call (940) 531-9746, we’ll tell you when the next technician can be there, and we’ll keep you updated if anything changes. For genuinely dangerous situations, like a gate that won’t stay closed on a property with children or pets, we prioritize the call.
Is it cheaper to repair or replace an electric gate motor?
If the gate operator is under about 10 years old and the failure is isolated, repair usually costs between $175 and $350 and is the better financial choice. If the motor is near the end of its service life, or the control board and limit switches have failed together, replacement often makes more sense than stacking repairs. We’ll give you both options with written pricing and let you choose. We don’t push replacements when a repair would last for years.
Do you work on all electric gate brands?
Our technicians are trained on nine major gate-motor brands including FAAC, BFT, Linear, and Viking. We match the repair to the system you already have rather than forcing a brand swap. That means the parts and the programming are correct on the first visit, not the third. Call (940) 531-9746 and tell us what you have; we’ll confirm we can service it before we schedule.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Dallas.