Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Dallas
A new driveway gate in Dallas typically costs between $4,800 and $18,000 installed, depending on the gate’s size, material, and whether you’re adding automation. Most installations take one to three days once materials are on site, and we schedule a free site measure first so the written price reflects your actual driveway, not a guess. If you’re in Preston Hollow, Highland Park, Lakewood, or anywhere else in Dallas, call (940) 531-9746 and a live person answers, day or night.
We work Dallas exclusively. That matters because gate installation here isn’t the same job as gate installation 40 miles east or north. The clay soil, the heat, the size of the gates on these properties: all of it shapes how a gate should be built so it doesn’t sag, stick, or fail within a season.
Why Carver Gate Repair Dallas Is Dallas’s Preferred Gate Installation Company
Gate Installation done wrong in Dallas shows up fast. A post set too shallow heaves out of plumb after one wet spring. An operator chosen for a mild climate shuts down on a 100-degree afternoon. Homeowners call us after paying someone else to learn that lesson.
Lonnie Burke runs the crew here. Every technician who shows up in a Dallas driveway is background-checked and in uniform, so you know who’s walking your property line before they ever touch a post hole. We give you a written price before any work starts. Not a ballpark, not a verbal estimate. A number on paper that doesn’t move unless the scope changes and you approve it in writing.
Our Dallas customers hold us to one standard: the gate works, it’s plumb, and it stays that way. That’s the Garrison Standard, and it’s been our operating rule since 2008. Every installation carries our 365-Day Done Right Promise in writing. If something isn’t right inside a year, we come back and fix it. No charge, no argument.
Styles & brands we work with
Gate Installation Services in Dallas
Gate Installation Services in Dallas means building and hanging a gate that stays square and true on soil that actively works against it. The job starts with the footing, because in this city the footing is the whole ballgame. We drill below the active clay zone before we ever set a post.
Most Dallas installations we do involve custom or semi-custom gates: ornamental steel, iron, or modern horizontal slat designs. A standard single swing gate with basic automation in Dallas runs roughly $5,500 to $9,000. A double or estate-scale gate runs higher, often $10,000 to $18,000. We quote the job after a site measure.
Driveway and Estate Gates
These are the big ones: 12 to 20 feet wide, often custom fabricated, built to match architecture that dates anywhere from 1950s ranch to new construction. We hang them with hinges sized for the gate’s full weight, not the gate’s weight on paper.
Pedestrian and Security Gates
Smaller than driveway gates, but they need the same footing discipline. A pedestrian gate on a 42-inch pier in Dallas clay stays put. One on a shallow pad starts sticking at the latch within a year.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Dallas
Electric Gate Installation in Dallas means matching the operator to the gate’s weight, the driveway’s slope, and the city’s summer heat. We automate gates across Gate Installation in Dallas with operators from LiftMaster, FAAC, Viking, and Elite, and we retrofit older systems when the actuator has finally given up.
A retrofit on an existing gate, where we add automation but keep the gate itself, usually runs between $2,800 and $6,500 in Dallas. A full new gate with automation starts around $6,500 and goes up with size, material, and entry features like keypads or vehicle loop detectors.
Retrofitting 1990s Linear Actuator Systems
North Dallas is full of driveway gates from the 1990s and early 2000s still running on linear actuators that were never built for Texas heat, which is why our Gate Repair - Dallas crew sees so many of them fail. The actuator binds as the gate’s top rail expands in summer, and eventually the gate twists out of square. We pull those and replace them with modern swing-arm operators that handle heat expansion without fighting the gate.
Underground Operators for Ornamental Gates
On Highland Park and Preston Hollow estates, an above-ground operator box sticking off the gate post looks wrong. We install underground Viking operators with proper drainage and heat venting so they don’t thermal-shutdown on a July afternoon.
Trusted Brands We Service in Dallas
We stock parts in the Dallas-Fort Worth metro for LiftMaster, FAAC, Viking, and Elite systems, which covers most of what’s hanging on gates in this city, plus we carry inventory for Dallas Mighty Mule service calls. When a Dallas gate goes down, waiting a week for a control board to ship from a warehouse in another state isn’t acceptable. We keep common boards, receivers, and photo eyes close so repairs and installations don’t stall over a part.
Common Gate Installation Problems We See in Dallas Homes
- Post heave in Blackland Prairie clay: Dallas’s heavy clay soil expands when wet and contracts when dry. A 12-foot ornamental iron swing gate can move a full inch out of plumb in one wet-dry cycle if the post footing wasn’t carried below the active clay zone.
- Underground operator thermal shutdown: Buried Viking operators in shallow pits overheat during 100-degree afternoons and lock out mid-cycle. The heavy gate stops halfway, and the homeowner is stuck with a 1,200-pound door they can’t move by hand.
- Actuator sag on 1990s gates: Original linear actuators on North Dallas gates bind and twist the top rail during summer expansion. The gate goes out of square before the operator fails, and by then you’re replacing both.
- Shallow footings from the original install: Gates hung in the 1980s and 1990s often sit on footings that are nowhere near deep enough for Dallas soil. The post tilts, the gate drags on the latch side, and the hinge welds start cracking.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Dallas, TX
Here’s what Dallas homeowners can expect. A mid-size single swing gate with standard automation runs $5,500 to $9,000. A custom double gate or estate-scale gate with operators, safety edges, and keypad entry runs $10,000 to $18,000 installed. A basic pedestrian gate with a maglock or keypad entry runs $2,200 to $4,500. The spread comes down to gate weight, post depth, operator type, and whether we’re running power to a location that doesn’t have it. Every quote is written before work starts. You get the number, you approve it, then we build. Call (940) 531-9746 for a free site measure and written estimate.
We Also Serve Cities Near Dallas
Our crews regularly handle installations in Irving, Mesquite, Lancaster, and Carrollton. Most of the same soil and climate conditions apply, and we approach each job with the same footing and operator standards we use across Dallas.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Dallas
At least 42 inches, and we carry them deeper when soil borings in the specific driveway show a shallower active clay zone. The point is to get below the depth where Dallas’s Blackland Prairie clay expands and contracts. A footing that stops at 30 inches will heave; we set 42-inch piers into stable clay and collar the post with high-strength concrete. Call (940) 531-9746 for a site evaluation on your specific lot.
Yes. Solar operators work well in Dallas because the city gets enough direct sun most of the year. The practical limit is the gate’s weight and how many cycles per day the opener runs. For a standard residential swing gate with normal daily use, a solar-charged battery system handles it. For a heavy 16-foot steel gate on a Preston Hollow estate, we can do solar, but most homeowners there choose a hardwired underground operator with a backup battery. Call (940) 531-9746 and we’ll look at your specific driveway.
Usually yes, if the gate itself is still square and the hinges aren’t worn. We assess the gate’s weight, the post condition, and the hinge barrel wear. Then we size an operator to the gate, not the other way around. If the posts have heaved out of plumb, that has to be fixed first, because no operator works right on a gate that drags. Call (940) 531-9746 for a free measure and a written answer.
For a heavy slide gate over 800 pounds, we spec a commercial-grade rack-and-pinion operator from LiftMaster or FAAC, sized with enough headroom for summer heat. Chain-drive operators work, but rack-and-pinion holds up better on long, heavy gates and doesn’t develop slack the way chain drives do in Dallas’s heat. The gate’s track and wheels need to be right too. Call (940) 531-9746 and we’ll come look at the gate.
Yes, and in Highland Park and Preston Hollow this is often the only option that looks right on a bespoke ornamental gate. We install buried Viking operators with proper drainage and venting so the unit doesn’t cook itself in a shallow pit. The pit has to be deep enough, with a drain path, or the motor fails inside two summers. That’s exactly why we do the install rather than leaving it to a generalist. Call (940) 531-9746 for specifics on your gate.
Dallas Gate Installation Done Right the First Time
A gate in Dallas lives in clay, heat, and humidity. If the footing is shallow, the post heaves. If the operator is undersized, it thermal-shuts on a 100-degree afternoon. If the gate is hung without accounting for steel expansion, it twists. We build for all three, and every installation carries our written 365-Day Done Right Promise.
Call (940) 531-9746 today for a free site measure and a written installation price. Lonnie Burke and the Carver Gate Repair Dallas crew run on The Garrison Standard: written prices, background-checked technicians, and a guarantee that’s actually in writing.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, operating to The Garrison Standard since 2008.