Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Carrollton
Gate repair in Carrollton runs between $180 and $2,800 depending on what failed. A hinge post that needs re-welding might cost $250 – $650, while a full operator replacement on an old swing gate typically lands between $1,200 and $2,800 including parts and labor. We dispatch crews into Carrollton six days a week, and our phones are answered by a live person around the clock. If your gate is stuck half-open on a Sunday night, call (940) 531-9746 and you’ll talk to someone who can schedule a technician, not a voicemail box.
Why Carver Gate Repair Dallas Is Carrollton’s Preferred Gate Repair Company
Carrollton homeowners deal with a specific set of gate problems that generalist contractors miss. The clay soil here expands and contracts with every wet-dry cycle, slowly leaning hinge posts and throwing swing gates out of square. Older 1960s and 1970s operators, common on the ranch homes west of I-35, use control boards that haven’t been manufactured in decades. When those fail, you need a shop that can source a compatible retrofit or tell you honestly when replacement is cheaper. That’s the work we do every week in Carrollton.
Our technicians are background-checked and uniformed on every call, and every job starts with a written price before any work begins. The number on that sheet is the number you pay. If a repair fails inside a full year, we come back and fix it at no charge under the 365-Day Done Right Promise. That’s not a sales pitch. It’s in writing, on every repair ticket, and it applies to every Carrollton job we do.
Lonnie Burke runs our Dallas-Fort Worth operation and holds every Carrollton technician to the same Garrison Standard the brand has operated under since 2008. Dispatch and scheduling are coordinated from our DFW metro office, but the crew that shows up at your driveway knows the gates and the HOA rules in this city. They’ve worked in Castle Hills, Indian Creek, and the older ranch subdivisions along Hebron Parkway. You get a specialist, not a handyman who does gates on the side.
Styles & brands we work with
Gate Welding in Carrollton
Gate welding in Carrollton is a more common request than most homeowners expect, and it usually comes down to the city’s older ironwork. Homes built between the 1960s and 1980s often have ornamental iron gates with bottom rails that have been rusting for forty years. Once the bottom rail corrodes through, the gate sags and no amount of hinge adjustment will fix it. The metal has to be cut back, a new section welded in, and the gate re-hung square. In Carrollton that work runs $250 – $800 depending on how much metal needs replacing and whether the hinges themselves are salvageable.
We use portable MIG welders on site, so the job happens at your property and the gate goes back on the same day. The welds get ground smooth, primed, and painted to match. For heavy scrollwork gates, we take extra care around the decorative elements, because a sloppy repair on an ornate gate is visible from the street.
Castle Hills Scrollwork Repairs
The Castle Hills neighborhood has some of the heaviest custom wrought-iron driveway gates in Carrollton. These are often 300 to 500 pounds with intricate scrollwork, and when a hinge post cracks or leans, standard repair methods don’t hold. In Castle Hills, our techs re-welded a cracked hinge post on a 1990s scrollwork driveway gate that had shifted out of square after years of clay soil movement. We used a portable MIG welder to reinforce the post footing and rehung the gate with a fresh LiftMaster operator, restoring the HOA’s required clearance. That kind of job costs $500 – $1,200 in this neighborhood, and it has to be done right the first time because the HOA will notice if it isn’t.
Rust Repair and Sag Correction
Wrought iron rusts from the bottom up in Carrollton’s humid climate, and the bottom rail is almost always the first failure point. If you hear the gate scrape when someone drives through, or you can see the rail sitting close to the driveway on one side, the metal has likely failed. We cut out the rotted section, weld in matching stock, and brace the gate so it hangs true. Sag correction without welding doesn’t last on this type of damage.
Commercial Gate Repair in Carrollton
Commercial gate repair in Carrollton covers a different set of problems than residential work. The city’s commercial corridors along Belt Line Road, Trinity Mills, and the I-35 corridor have slide gates, barrier arms, and high-cycle swing gates that open and close hundreds of times a day. When a slide gate jams at an apartment complex or a self-storage facility, the property owner can’t wait three days for a part. Our Dallas-Fort Worth office stocks common components for Carrollton commercial customers, which means most commercial repairs are diagnosed and completed the same day. Typical commercial gate repair in this market runs $350 – $3,500, with operator replacements on the upper end.
Slide Gate and Rack-and-Pinion Systems
Carrollton’s heavier commercial sites use slide gates, and the older ones run on rack-and-pinion systems that are now jamming after decades in service. Clay soil movement pushes the concrete track or footer out of line, then the gate binds against the pinion gear and the motor overheats. We realign the track, replace worn rack sections, and set the limit switches so the operator isn’t fighting the weight of the gate. Parts for older commercial slide operators sometimes need to be sourced, but we’ll give you a written timeline before any work starts.
Loop Detectors and Safety Edges
Commercial gates in Carrollton are legally required to have safety devices that stop the gate if a vehicle or person is in the path. Loop detectors buried in the driveway and photo eyes mounted on the gate frame do this job. When a loop detector fails, the gate will not stay open for an exiting vehicle, and that gets annoying fast at an apartment complex. We test and replace loop detectors and re-terminate the safety edges, because no commercial gate is safe to operate without them.
Trusted Brands We Service in Carrollton
Our technicians are trained on the operator brands already installed across Carrollton homes and businesses, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We don’t push one brand. We repair the one that’s already on your property, using the correct parts for that specific model. For Carrollton customers, that means less waiting on parts, because we stock common LiftMaster and FAAC components in our DFW metro warehouse. If your gate operator is obsolete and the control board is gone, we’ll lay out retrofit options in writing, with prices, so you can make an informed call.
Common Gate Repair Problems We See in Carrollton Homes
- Obsolete control boards on 1980s-era swing gate operators. These boards short out after thunderstorms, leaving the gate stuck half-open. The exact replacement part is often discontinued, so we retrofit or replace rather than scrounge for used boards.
- Hinge posts leaning from clay soil movement. Call it the Carrollton lean. Wet years and dry years shift the soil under the post footing, and suddenly the gate hits the latch plate or drags on the driveway. We re-set the post or weld a reinforcement plate to the base.
- Slide gates jamming after heavy rain. Carollton’s clay soil swells when wet, throwing the track alignment out and binding the gate. It happens most after spring and fall storms, and forcing the gate just strips the gear.
- Rusted bottom rails on older wrought iron gates. The humid summers and occasional winter freezes create condensation that eats through the rail. Once it’s rusted through, the gate sags and needs welding work, not hinge adjustment.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Carrollton, TX
Gate repair costs in Carrollton follow a clear range, and you’ll see your exact number in writing before any work starts. Hinge and post repairs: $180 – $650. Weld and rust repair: $250 – $1,200, with Castle Hills scrollwork on the high end. Operator or control board replacement: $450 – $1,800 swing gates, $800 – $2,800 slide or commercial gates. Gate realignment: $150 – $400. The written estimate you get is the price you pay, agreed before the technician opens a single panel. Call (940) 531-9746 for a free estimate and a straight answer on what your gate actually needs.
We Also Serve Cities Near Carrollton
Our Carrollton crews also cover nearby communities, including Carrollton, Dallas, Irving, Mesquite, and Lancaster. If you live just outside the city limits and need Gate Repair, call us and we’ll confirm coverage before you schedule. Same written price, same full-year guarantee, same live person on the phone.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Carrollton
Yes, most older swing gate operators in Carrollton can be retrofitted with modern photocells and safety edges without replacing the motor. The cost runs $250 – $600 depending on the operator’s control board and whether it has open input terminals. If the board is obsolete, we’ll quote a full replacement before we do anything, and you get that price in writing. Call (940) 531-9746 and we’ll assess it on site.
If the gate sags but the metal itself is intact, hinge adjustment or replacement may be enough, around $180 – $350. If the bottom rail is visibly rusted through, cracked, or has holes, the gate needs welding because no adjustment will lift a compromised frame. You can hear the difference, too. A gate with broken welds rattles when it moves. Call us and we’ll tell you which one it is.
Carrollton sits on expansive clay soil that swells when wet. The concrete track or post footer shifts, the gate binds on the rack, and the motor stalls or strips the gear. We realign the track, reset the post if it’s moved, and replace damaged rack sections. Typical cost: $300 – $900. Forcing the gate open by hand after a storm often damages the gear further, so call first.
It depends on the model’s support and the board’s availability. Some 1970s and 1980s FAAC boards are still repairable or replaceable, around $300 – $600. Others are discontinued, and a retrofit operator with modern safety inputs runs $1,200 – $2,200 installed. We’ll quote both options in writing and recommend the one that costs less over the next five years, not just today.
Yes, many planned communities in Carrollton, including Castle Hills and Indian Creek, have HOA covenants that govern gate style, height, finish, and maintenance standards. Some require architectural review before any gate replacement or major repair. We’ve worked inside these HOAs long enough to know what triggers a compliance issue, and we’ll make sure the repair matches the community’s standard before we start. Call (940) 531-9746 for a free estimate and we’ll review any HOA documents in advance.
Call Carver Gate Repair Dallas for Gate Repair in Carrollton
If your gate is sagging, jammed, rusted through, or dead at the opener, call (940) 531-9746. You’ll reach a live person who can schedule a background-checked technician for a free, no-cost estimate. Every Carrollton job includes a written price before any work starts, a written one-year guarantee on the repair, and a free second visit if anything fails inside that window. We answer the phone 24 hours a day, every day, including weekends and holidays. That’s The Garrison Standard, and it’s how we’ve run since 2008.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Carrollton under The Garrison Standard since 2008.