Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lake Highlands, TX
Carver Gate Repair handles automatic driveway gates, ornamental iron gates, and gate motor systems across Lake Highlands, TX. The work here leans heavily on repair, not replacement, because most gates sit on larger mid-century ranch and 1980s custom-home lots where the clay soil never stays put. Posts shift, gates drag, and operators strain against gravity on alleys that slope toward White Rock Creek. If your gate is stuck, sagging, or refusing to open, call (940) 531-9746. A live person answers, every time, and every job starts with a written price before any work begins.
Why Lake Highlands Homes Are Different
Lake Highlands was built mostly between the 1950s and 1980s, and the gates reflect it. We see a lot of heavy steel driveway gates mounted on posts set decades ago, long before anyone accounted for Dallas County’s expansive clay soil. That soil swells when wet and shrinks when dry, and over thirty or forty years it walks posts out of alignment a fraction of an inch at a time. A gate that scraped the driveway last spring may not latch at all by fall.
The freeze-thaw cycle adds a second layer. Ice storms hit Lake Highlands every few winters, and when water works into gate hinges, operator housings, and control boards, the freeze expands it. We regularly find swing operators with cracked housings and limit switches that stopped responding after a hard freeze. Gates on alleys sloping down toward White Rock Creek have it worst: the downhill post wants to lean, and the operator has to push against both the gate’s weight and the grade. That combination is why Lake Highlands calls are rarely a simple hinge swap. A proper repair means checking post plumb, re-setting alignment, and testing the motor under load, not just making the gate move again.
Styles & brands we work with
Our Main Lake Highlands Services
Most Lake Highlands homeowners call us for one of three things: a gate that won’t open or close, a gate that needs to be installed from scratch, or a motor that works intermittently or not at all. Each has its own page here, with Lake Highlands-specific pricing and detail.
Gate Repair in Lake Highlands
A sagging gate on a 1960s ranch or an ornamental iron gate on a newer infill build both come back to the same fundamentals here: post alignment, hinge wear, and ground movement. On Lake Highlands lots with clay soil, we commonly find uphill posts that have crept out of plumb and latches that no longer line up. We re-set posts with deeper concrete where needed, replace worn hinges and rollers, and test the gate through its full travel before we call the job done. Every repair carries a written one-year guarantee. Gate Repair in Lake Highlands
Gate Installation in Lake Highlands
Newer infill construction in Lake Highlands often includes ornamental iron driveway gates, and those installations need to be set for the soil they will live in, not just for the day they are installed. We dig footings below the clay movement line, set posts true, and hang gates that clear the driveway through all four seasons. For homeowners replacing an older gate, we match the hardware style to the house, whether that is a 1950s ranch or a two-story brick custom home. Every installation is quoted in writing before materials are ordered. Gate Installation in Lake Highlands
Gate Motor Repair in Lake Highlands
When an operator quits in Lake Highlands, the cause is usually one of three things: a limit switch knocked out of sync, a control board damaged by a power surge, or a motor worn down from years of pushing a gate that was heavier than it was rated for. Our technicians carry parts for LiftMaster, DoorKing, Elite, and Mighty Mule systems, and we diagnose the operator on site before recommending repair or replacement. The price for the fix is written down and agreed to before the work starts. Gate Motor Repair in Lake Highlands
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lake Highlands
We work on nine gate-motor brands, and in Lake Highlands that most often means LiftMaster, DoorKing, Elite, and Mighty Mule systems. Our trucks carry common control boards, limit switches, and remotes for these brands, which means many repairs finish same-day without a second trip. See the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lake Highlands, TX
| Service | Typical range in Lake Highlands |
|---|---|
| Gate service call and diagnostic | $75 – $125 |
| Gate hinge replacement | $150 – $300 |
| Gate post re-setting | $450 – $900 |
| Gate latch or lock replacement | $120 – $250 |
| Gate wheel or roller replacement | $100 – $220 |
| Swing gate operator motor replacement | $850 – $1,500 |
| Slide gate motor replacement | $1,200 – $2,200 |
| Control board replacement | $350 – $700 |
| Gate remote or keypad replacement | $80 – $180 |
| Full gate installation (single swing gate, standard width) | $1,800 – $4,000 |
| Gate motor and operator installation | $1,500 – $3,500 |
What pushes Lake Highlands prices up is post work. If the clay soil has moved a post out of plumb, re-setting it means digging a new footing, which adds labor and concrete. The written price you get before work starts is the price you pay; the number is on paper before our technician ever touches a tool.
Neighborhoods We Serve in Lake Highlands
We take calls all over Lake Highlands, from the older ranch streets to the newer infill homes going up along major corridors. Our dispatch runs from our Dallas-Fort Worth office, and crews serving Lake Highlands are scheduled daily.
- L Streets
- Lake Highlands Estates
- White Rock Valley
- Richardson Terrace
- Merriman Park
Response time across Lake Highlands is same-day for most repairs, with calls in the morning usually seen the same afternoon.
Service Area – Cities Near Lake Highlands
Beyond Lake Highlands, our crews cover the metro from Dallas, TX to Irving, TX, Carrollton, TX, and Mesquite, TX. If your gate is outside neighborhood limits but inside the broader DFW service area, call and a live person will tell you the next available dispatch.
Serving Lake Highlands, TX - Our Local Coverage Area
We’re based in the Lake Highlands area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lake Highlands
Most Lake Highlands repairs are scheduled same-day, especially for gates stuck in the open or closed position. Call (940) 531-9746 and a live person will give you a current dispatch window for your neighborhood.
Repair work on an existing gate generally does not require a permit in Dallas County, but an HOA may have rules about gate style or material changes. Replacements and new installations sometimes require HOA approval. We can tell you what to submit but do not handle filings for you.
Estimates are free. Every job starts with a written price before any work begins, so the number you see is the number you pay. A second visit is free if a repair fails within the one-year guarantee period.
We serve Lake Highlands and the surrounding cities, including Dallas, Irving, Carrollton, and Mesquite. Dispatch is coordinated from our Dallas-Fort Worth office, and crews are scheduled daily across the metro.
If your gate is stuck, sagging, or refusing to move, call (940) 531-9746 now. A live person answers, a uniformed technician shows up with the right parts, and the price is in writing before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Highlands Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.