Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Lakewood, TX
Gate work in Lakewood is different from anywhere else in Dallas. The housing stock is a century old, the lots are long, and the ironwork is often as original as the siding. We’re Carver Gate Repair, and we send background-checked, uniformed technicians to Lakewood who understand what those conditions mean for a gate hitched to a 1920s Craftsman with a detached garage at the back of a deep driveway. Calls are answered by a live person 24/7 at (940) 531-9746, and every job starts with a written price before any work begins.
Why Lakewood Homes Are Different
Lakewood’s gates don’t come off a rack. Most of the homes here went up in the early 20th century, and a lot of the original gates are still standing – or swaying. Custom metal and wood designs were matched to Craftsman and Tudor Revival details, and many pedestrian gates carry a small speakeasy door, that little hinged hatch from the 1920s, now sagging on corroded pins and pulling the whole frame out of square. We reinforce those rather than replace them. It preserves the vintage look and costs less than fabricating new ironwork to match.
Climate does its part too. Lakewood’s humid summers swell wooden gates until they stick against the post, and winter ice does the opposite, shrinking and splitting boards until hinges carry more weight than they were set for. Metal gates sweat in the humidity and bloom rust at the lowest hinge, where water sits. We see seasonal hinge realignment and rust treatment calls here more than almost anywhere else in Dallas. A gate that scrapes in June is a gate that seized by August. Long driveways matter as well: gates at the back of a deep lot sit farther from the street, so limit switches and loop detectors have to be matched to a longer wire run and a steeper grade than a standard suburban install.
Styles & brands we work with
Our Main Lakewood Services
Three services cover most of what we do in Lakewood. Each has its own page with pricing and detail; this page keeps to the overview of what makes gate work different here.
Gate Repair in Lakewood
Sagging speakeasy doors, rust-eaten hinge brackets, warped cedar pickets on original garden gates – most repair calls in Lakewood start with one of those three. We square the frame, re-set hinges with appropriate fasteners for old posts, and match replacement boards or iron sections to the existing style. On many pre-1940 gates we find the original screws are slotted and set in wood that has rotted around them, which means pulling and plugging before anything can be reattached. It’s slower work, but it is the right way to back a written guarantee. Read the full detail on Gate Repair in Lakewood.
Gate Installation in Lakewood
We fabricate and install gates sized to Lakewood’s unusual openings – many are non-standard widths to accommodate long driveways and detached garages. Whether it’s an ornamental steel gate matching a Tudor Revival entry or a cedar privacy gate on a residential lot, the job starts with a measured site visit and a written price. New installs here often involve matching original scrollwork, which we can do rather than forcing a modern panel into a 1920s opening. Full details are on Gate Installation in Lakewood.
Gate Motor Repair in Lakewood
Swing and slide operators in Lakewood sit in the same humidity that rusts the gates, so motor repair here often starts at the limit switch, the loop detector, or the articulating arm where water has gotten in. Older wires run through conduit that has shifted over the decades, and long driveway runs stress operators that were never sized for the distance. We diagnose on site, carry parts for nine major brands, and quote the repair before the box is opened. See Gate Motor Repair in Lakewood for figures and what the repair includes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lakewood
We’re trained and stocked for the operators Lakewood homes already have – FAAC, BFT, Viking, and Linear among them, nine brands total. We carry common boards, limit switches, and loop detectors on the truck so a one-trip repair is the norm, not the exception. Our brands page lists the full range.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Lakewood, TX
| Service | Typical range in Lakewood |
|---|---|
| Gate repair service call | $90 – $190 + parts |
| Hinge replacement and frame realignment | $180 – $400 |
| Gate motor repair (labor + standard parts) | $280 – $650 |
| Gate motor replacement (operator installed) | $1,200 – $2,800 |
| Pedestrian gate repair | $150 – $450 |
| Gate panel replacement (single swing) | $800 – $2,400 |
| Loop detector replacement | $250 – $600 |
| Limit switch replacement | $120 – $280 |
| Full gate installation (material + labor) | $3,500 – $9,000 |
| Solar operator upgrade | $900 – $2,200 |
| Keypad or intercom install | $300 – $900 |
| Safety sensor and photo-eye alignment | $150 – $380 |
Lakewood prices run toward the higher end of those ranges when the job involves matching original ironwork, a long wire run from the house, or a gate that has to be squared within a vintage opening. Every price is written and quoted before any work begins – the number doesn’t move at the door.
Neighborhoods We Serve in Lakewood
We cover the full Lakewood area, from the older blocks near Lakewood Country Club up through the hillier streets toward Abrams Road. Most calls in the area get a same-day or next-day visit.
- Lakewood proper
- Lakewood Heights
- Kidd Springs area
- Streets near East Dallas and the White Rock Lake corridor
- Neighborhoods along Abrams Road
Service Area – Cities Near Lakewood
While this page covers Lakewood specifically, our crews also serve the surrounding metro. For gate work elsewhere in the area, see Dallas, TX, Irving, TX, Carrollton, TX, and Mesquite, TX.
Serving Lakewood, TX - Our Local Coverage Area
We’re based in the Lakewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lakewood
Most Lakewood calls get same-day or next-day scheduling, including evenings and weekends. We don’t route a call center; a live person answers and sets a specific arrival window. If it’s a gate stuck open, we treat it as a priority.
Some Lakewood properties fall within historic-district review or neighborhood associations with design standards for exterior work. We provide a written description and drawing of the proposed work for your HOA or review board, and we won’t start until approval is in hand. Call (940) 531-9746 and we’ll walk through what your street requires.
Yes, and we preserve them when possible. The original 1920s speakeasy doors are part of why Lakewood gates can’t just be swapped for stock panels. We rebuild sagging jambs, replace worn hinge pins, and reinforce the frame from the inside so the vintage face stays intact.
For an exact price and a written quote, call (940) 531-9746. Lonnie Burke runs the crew, and the price is always in writing before any work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lakewood Customers Say
"Photo eyes cleaned and aligned. Gate stops for the dog like it should."
- Henry B."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.