Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Motor Repair Across University Park
A gate motor repair in University Park typically costs $340 – $880 depending on the operator type and whether the problem is electrical or mechanical. Most University Park jobs are completed same-day or within 24 hours, and we always provide a written price before any work starts. If your driveway gate is stuck, grinding, or refusing to open, call Carver Gate Repair Dallas at (940) 531-9746 and a live person answers.
We work on University Park’s distinctive gates every week. Ornamental iron, brick pillar swing arms, underground operators, keypads tied into older intercom systems. The housing stock here demands a different approach than a standard suburban install. These gates are heavy, custom-fabricated, and often twenty to thirty years old. We run a background-checked, uniformed crew that treats the gate and the property with the same care.
Why Carver Gate Repair Dallas Is University Park’s Preferred Gate Motor Repair Company
Homeowners in University Park call us because we show up when we say we will and the price on the written quote is the price on the invoice. That sounds simple. It is rare in this trade. Lonnie Burke built this crew around the Garrison Standard: written prices, background-checked technicians, a full-year written guarantee on every repair, and a phone that is answered by a real person 24 hours a day. We don’t route you to a call center. You get a live dispatcher any hour, including holidays.
University Park is a referral-driven market. When we fix a gate on University Boulevard or along Turtle Creek, the neighbors notice the truck and the uniform. They ask who did the work. That is how we have built our reputation in the Park Cities area. The detail that matters to our University Park customers is that we do not send a generalist. The technician at your gate works exclusively on gate motor systems and knows the equipment on your property.
For a full overview of what we cover, see our Gate Motor Repair service page. For local context specific to this area, our Gate Motor Repair in University Park hub explains our service area in detail.
Styles & brands we work with
Gate Motor in University Park
Gate motor work in University Park usually means repairing or replacing the operator on a swing gate mounted to brick or stone pillars, or a slide gate running along a perimeter wall. The job may involve a bad capacitor, a failed control board, stripped gears, or a motor that has been pushed past its duty rating for years. We diagnose the exact fault before quoting anything.
A swing gate motor replacement in University Park typically runs $620 – $880 for the operator, installation, and programming. A gearbox rebuild or control board replacement lands lower, often $340 – $520. Underground operator work runs higher because of the excavation and waterproofing involved.
Diagnosis Before Replacement
We do not guess. A seized gear on a DoorKing or FAAC unit sounds different from a failed start capacitor on a LiftMaster. Our technicians open the box, test the limit switches and the board, and tell you exactly what failed and what it costs to fix versus replace.
Heavy Gate Duty
University Park gates are routinely 14 to 18 feet of steel or ornamental iron. An operator rated for a light 300-pound gate will fail on that load. We match the motor to the actual weight and cycle frequency, not the cheapest option that fits the footprint.
Gate Remote Control in University Park
Gate remote control problems in University Park often come down to aging receivers, dead keypad boards, or interference from nearby utility equipment. A remote that works only at short range usually points to a failing receiver or a weak antenna, not the remote itself. Replacing a remote control and reprogramming the receiver at your University Park property typically runs $95 – $185 per remote. A new keypad adds $160 – $280 installed.
Keypad and Intercom Integration
Many University Park homes pair the gate keypad with an older intercom or camera entry system. We test the entire chain: keypad to receiver to motor. If the intercom is fine but the receiver is deaf, we don’t sell you a new intercom. We replace what failed.
Rolling Code Security
Older remotes that use fixed codes can be cloned. If your University Park gate remote is fifteen years old, we recommend a rolling-code replacement. It costs a bit more up front but closes a real security gap.
Trusted Brands We Service in University Park
We carry parts and replacement units for the brands found across University Park properties: DoorKing, Elite, Mighty Mule, LiftMaster, and several others. DoorKing swing arms are common on this city’s brick pillar installations. Elite slide gate operators show up on the longer wall runs. Mighty Mule is what we often find on older DIY retrofit installs that have outlived their useful life. Because our technicians work on these systems every day, they arrive with the right parts in the truck instead of ordering and returning a week later.
Common Gate Motor Repair Problems We See in University Park Homes
- Thermal overload in undersized operators. Gates installed during the 1980s – 2000s building boom were often paired with motors too small for their duty cycle. During University Park’s July afternoons, the control board overheats and the gate stops mid-swing. We see this most on long brick wall runs along the busier collector streets.
- Sagging ornamental panels pulling hinge posts out of alignment. University Park’s high-clay soil shifts with moisture cycles. That movement causes rack and pinion drives on slide gates to bind and strip gears. The motor is often healthy; the gate geometry is the problem.
- Intermittent safety photocell faults. Sun glare off brick walls or aging wire insulation breaks the safety beam signal. The keypad goes dead and a car sits trapped in the driveway. This is a simple fix when diagnosed correctly, and a recurring headache when guessed at.
- Obsolete Linear arm operators in Snider Plaza. Many 1990s gates in the Snider Plaza area still run on Linear swing arms that are no longer manufactured. Parts are scarce enough that we routinely retrofit newer swing arms onto the original brick pillars, keeping the façade intact.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Motor Repair in University Park, TX
A gate motor diagnosis in University Park costs a flat service call fee that is applied toward your repair if you approve the work. From there, control board replacement runs $340 – $520, swing arm operator installation lands at $620 – $880, and full slide gate retrofits start around $1,100 and go up based on gate weight and length. Remote replacement is $95 – $185 per remote, and keypads run $160 – $280 installed.
The number we quote is the number you pay. No surprise line items. No adjustment at the door because the job got harder. We quote before work starts, and the guarantee is in writing for a full year from the service date.
Call (940) 531-9746 for a free estimate on any gate motor issue in University Park.
We Also Serve Cities Near University Park
Our technicians cover University Park and the surrounding communities. We take calls from Dallas, Irving, Carrollton, and Mesquite, with the same written pricing and the same guarantee applied no matter the address. If you are in one of those cities and your gate has stopped responding, the phone number is the same and a live person picks up.
Serving University Park, TX - Our Local Coverage Area
We’re based in the University Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Motor Repair in University Park
Thermal overload is the usual culprit, especially on operators installed in the 1980s and 1990s that were undersized for the gate’s actual weight. North Texas summer heat pushes the control board and capacitor past their rated temperature. In University Park, we frequently replace these older units with heavier-duty operators rated for continuous-duty cycles in direct sun. Call (940) 531-9746 and we’ll test the motor temperature and duty rating before recommending a fix.
Yes. We retrofit new swing arm operators onto the original brick pillars on a regular basis in Snider Plaza. The original Linear arms are no longer manufactured and parts are scarce, so we install a compatible operator that mounts cleanly to the existing stone and matches the gate’s throw. The pillars stay untouched. Call us for a written quote on the retrofit.
Usually the motor is being overworked by a gate that has drifted out of alignment. University Park’s clay soil expands and contracts, which shifts hinge posts and causes heavy ornamental panels to sag. We commonly find the motor working harder than it should, with stripped gears following shortly after. We reset the hinge post, true up the gate, then assess whether the motor needs replacement.
Not necessarily. If your keypad is a standard wired unit that still holds its programming, it can often be wired into the new operator without replacement. We test the keypad’s output, the receiver, and the wiring before recommending anything. If the keypad is the failure point, a new one installed typically runs $160 – $280 on a University Park property.
Yes. University Park follows state and federal gate safety standards, which require entrapment protection like safety photocells, contact edges, or both on any new or serviced automatic gate system. We install and test these devices as part of every motor replacement or major repair. If you have an older system without proper protection, we will flag it and quote the needed safety upgrades before completing the work.
Call Carver Gate Repair Dallas for Gate Motor Repair in University Park
If your gate is stuck, grinding, or leaving you trapped on either side of it, call (940) 531-9746. A live person answers, day or night, and schedules your University Park service call. We show up with a written price, do the job to the Garrison Standard, and back every repair with a written one-year guarantee. The repair is either done right, or we return free of charge.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving University Park and the surrounding communities.