Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Far North Dallas
Gate repair in Far North Dallas usually comes down to two things: a post that has shifted in expansive clay soil, or an opener that has lost its calibration on a heavy ornamental gate. Most repairs run $225 to $475 for common fixes like hinge work, sensor realignment, and operator adjustments. Full operator replacement on a high-end driveway gate typically runs $850 to $1,600. If your gate is sagging, binding, or refusing to open, call us at (940) 531-9746 and we’ll send a background-checked technician to your Far North Dallas home with a written price before any work starts.
Why Carver Gate Repair Dallas Is Far North Dallas’s Preferred Gate Repair Company
We work on gates across Far North Dallas every week, from the estate lots off Preston Road to the gated communities near the Addison border and the custom homes around Hillcrest and Arapaho. Our Gate Repair crews know what these neighborhoods demand because we’ve seen it on hundreds of service calls: ornamental iron that has to stay square, operators that have to hold calibration through a Texas summer, and property owners who don’t have time for a second visit. Lonnie Burke runs our Dallas operation, and he holds every technician to The Garrison Standard: background-checked, uniformed, and on-site with a written quote before tools come off the truck.
Far North Dallas customers don’t call us because their gate is loose. They call because a technician no-showed, or the last quote grew by $400 once the post was dug up. That’s why the written price matters. The number we give you before work starts is the number on the invoice, no exceptions. Every repair carries a 365-Day Done Right Promise in writing, and if the same repair fails inside that year, the second visit is free.
Styles & brands we work with
Metal Gate Repair in Far North Dallas
Metal Gate Repair in Far North Dallas usually means ornamental iron or steel. These gates are heavy. A single driveway swing panel on a Preston Hollow estate can weigh 400 to 600 pounds, and every pound of that weight bears down on the hinge posts and the operator. When a post leans even half an inch in expansive clay, the gate starts to scrape, the opener strains, and eventually something fails. We repair sagging hinges, cracked and broken welds, bent panels, and post anchors that have worked loose. Fabrication-grade welding on ornamental iron in Far North Dallas typically runs $180 to $380. A full hinge replacement with realigned posts runs $350 to $750, depending on what the soil has done to the footing.
Hinge and Post Repair on Ornamental Gates
Most ornamental gate failures start at the hinge post. In Far North Dallas, the soil expands when wet and shrinks when dry, which slowly works shallow footings out of plumb. We remove the gate, excavate the old footing, and pour a deeper concrete pier before rehanging the panel. The goal isn’t just to make it swing today. It’s to keep it swinging straight through the next dry summer and the next freeze cycle.
Weld and Rust Repair on Steel Gates
Cracked welds on steel driveway gates are common in Far North Dallas because North Texas temperature swings cause constant expansion and contraction. A hairline crack at a picket or a stress point will spread. We grind out the failed weld, re-weld it properly, and reinforce any spot that has cracked more than once. Surface rust gets treated before it becomes structural rust, especially on gates that face the afternoon sun off the Dallas North Tollway corridor.
Wood Gate Repair in Far North Dallas
Wood Gate Repair in Far North Dallas covers everything from cedar privacy gates on zero-lot-line homes to heavy custom wooden driveway gates paired with ornamental iron. The climate here works against wood in two directions: summer heat dries and shrinks the boards, while spring rain and humidity swell them. That cycle loosens hinges, warps panels, and pulls latch hardware out of alignment. Common fixes include reshaping a sagging gate with a new diagonal brace, replacing rotted pickets, and resetting hinge screws into solid wood or through-bolts. Typical wood gate repair in Far North Dallas runs $160 to $320. A full rebuild with new framing and cedar cladding runs $500 to $900 depending on gate size.
Gate Realignment and New Bracing
A wooden gate that drags on the driveway or won’t latch has usually lost its structural diagonal. We re-square the frame, install a new brace, and rehang it so the latch post and the hinge post work together. On gates that have shifted because the fence post itself moved in clay soil, we address the post before touching the gate panel.
Lock and Latch Repair on Wood Gates
Gate locks on Far North Dallas backyards take more abuse than most people realize. Heat and humidity cause wood to move, which changes the strike plate alignment by an eighth of an inch, which is all it takes for a deadbolt to stop seating. We repair and replace latch hardware, install new locksets, and adjust strike plates so the gate locks cleanly every time without forcing.
Trusted Brands We Service in Far North Dallas
We service, repair, and replace operators from LiftMaster, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, Ghost Controls, and DoorKing. Far North Dallas homes often have one of two setups: an original LiftMaster or Mighty Mule opener that dates back years, or a newer FAAC or Elite unit retrofitted onto a heavy custom gate. Our technicians are trained on all nine brands, and we keep common parts and control boards in local stock so a repair on a LiftMaster operator in Far North Dallas is often completed the same day rather than waiting on a shipped part.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Far North Dallas Homes
- Leaning posts after a dry summer. Expansive clay shrinks when it dries out, and a gate post set on a shallow footing starts to tip. The opener then binds, the gate scrapes, and the safety sensors lose alignment.
- Sagging hinges on heavy ornamental gates. Wrought iron and steel gates weigh hundreds of pounds. Over years of heat-and-freeze cycles, hinge pins wear and the gate drops, which causes latch and sensor problems.
- Thunderstorm damage to control boards. Far North Dallas gets hard spring storms, and a nearby lightning strike or a power surge can take out a gate opener’s control board or short low-voltage wiring.
- Failing underground operators on estate gates. Custom driveway gates in Preston Hollow and similar neighborhoods often use underground swing operators. These units are sealed, but years of soil movement and moisture intrusion lead to motor and limit switch failures.
Pricing for Gate Repair in Far North Dallas, TX
Here’s what you can expect to pay for common gate repairs in Far North Dallas. A service call and diagnosis runs $75, which is applied toward any repair we complete. Hinge and post work on a typical single swing gate runs $350 to $750. Weld repair on ornamental iron runs $180 to $380. Operator troubleshooting and calibration runs $150 to $300, while a full operator replacement with labor runs $850 to $1,600. Wood gate repair runs $160 to $320, and a full wood gate rebuild runs $500 to $900. Every quote is written and agreed before work begins. Call (940) 531-9746 for a free estimate on your specific gate.
Key Takeaways:
- Most Far North Dallas gate repairs run $225 to $475; full operator replacement runs $850 to $1,600.
- Written price before any work starts, backed by The Garrison Standard.
- Every repair includes a 365-Day Done Right Promise in writing.
- Our technicians service all nine major gate operator brands, including LiftMaster, Elite, and Mighty Mule.
We Also Serve Cities Near Far North Dallas
Our crews cover Far North Dallas and the surrounding metro every day, including Far North Dallas neighbors in Dallas proper, Irving, Carrollton, and Mesquite. If your gate is giving you trouble and you’re anywhere in the north Dallas corridor, call (940) 531-9746 and we’ll get a technician scheduled.
Serving Far North Dallas, TX - Our Local Coverage Area
We’re based in the Far North Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Far North Dallas
Far North Dallas sits on expansive clay soil that shrinks when it dries out, which leaves shallow post footings loose in the ground and lets the post lean. We fix this by excavating and pouring a deeper concrete pier, typically 3 to 4 feet deep, before re-setting the post and rehanging the gate. Call (940) 531-9746 to have a leaning post inspected.
Yes, in most cases. A sagging ornamental iron gate usually has worn hinge pins or a shifted hinge post, not a failed panel. We replace the hinges, re-square the frame, and reset the post if needed, which is far less expensive than fabricating a new gate. Most of these repairs are completed in one visit.
Far North Dallas thunderstorms often cause power surges that damage gate opener control boards or short low-voltage wiring to the keypad and safety sensors. We test the board, keypad, and wiring, then replace only what has failed. If the whole board is fried, we typically have replacement boards for LiftMaster, FAAC, Elite, and other brands in stock locally.
Yes. Our crews regularly service underground swing operators on custom driveway gates in Preston Hollow and throughout Far North Dallas. These sealed units are sensitive to the area’s soil movement and moisture, and we handle motor replacement, limit switch calibration, and wiring repair on all major underground operator brands. Call (940) 531-9746 for an inspection.
We repair LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. That covers nearly every residential and estate gate opener installed in Far North Dallas. We keep common parts in local stock so most operator repairs don’t wait on shipping.
Our crew recently rebuilt a leaning hinge post on a heavy ornamental iron swing gate in Preston Hollow, where the post’s original footing was only 18 inches deep. We excavated and poured a 4-foot concrete pier, corrected the sag at the hinge post, and reinstalled the LiftMaster operator with realigned safety photocells. The gate swings silently now, even as the ground shifts through the next dry season.
If your Far North Dallas gate is sagging, leaning, or refusing to open, don’t wait for the next storm or the next heat wave to make it worse. Call Carver Gate Repair Dallas at (940) 531-9746 and speak with a live person, any hour, any day. We’ll schedule a background-checked, uniformed technician to your home with a written price in hand before any work begins. That’s The Garrison Standard, and it applies to every gate we touch.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Far North Dallas under The Garrison Standard.