Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Dallas?
Gate installation in Dallas typically runs between $2,800 and $9,500 for a complete project, including the gate itself, posts, hardware, and labor. Most homeowners in the Dallas area spend around $4,500 for a standard steel driveway gate with a manual opener. Automated swing or slide gates with intercom systems start near $6,000 and can exceed $15,000 for custom work in neighborhoods like Highland Park or Preston Hollow.
Gate Installation Cost Breakdown (2026)
Here’s where the money goes on a typical Dallas gate installation. These numbers reflect what we see on jobs across Dallas, Plano, Richardson, and the surrounding metro in 2026:
| Component | Typical Cost Range (Dallas, 2026) |
|---|---|
| Steel driveway gate (single swing, 12-14 ft) | $1,800 – $4,200 |
| Aluminum driveway gate (single swing) | $1,400 – $3,600 |
| Wood driveway gate (cedar, single swing) | $1,200 – $3,000 |
| Slide gate (steel, rolling track) | $2,500 – $6,500 |
| Gate operator (swing motor) | $900 – $2,200 |
| Gate operator (slide motor) | $1,200 – $2,800 |
| Steel posts, set in concrete | $300 – $700 per post |
| Keypad or intercom entry system | $250 – $1,500 |
| Labor (2-3 person crew, 1-2 days) | $800 – $2,400 |
| Permit fees (City of Dallas) | $75 – $300 |
| Demo and haul-away of old gate | $150 – $500 |
Those are honest, current numbers for the Dallas market. A basic Pedestrian Gate off a side yard might land under $1,500 total. A full driveway setup with an automated slide gate, keypad, and vehicle detection loop in a newer North Dallas subdivision can push past $12,000. The spread is real, and it’s driven by a handful of specific factors.
What Affects Gate Installation Pricing in Dallas
Every Dallas neighborhood has its own challenges. A gate job in Lakewood with a century-old brick column is a different animal than a fresh install on a flat lot in Frisco. Here’s what moves the number:
- Gate material and weight. Steel is the most common choice in Dallas for driveway gates, and thicker gauge steel costs more but resists sagging better in the summer heat. Aluminum weighs less and puts less strain on the operator, but it dents easier in a hailstorm. Cedar gates look right on older homes but need re-sealing every few years under Texas sun.
- Swing vs. slide configuration. Swing gates need level ground and enough setback for the arc. Slide gates require a flat run of fence line and a roller track. On sloped lots in areas like Cedar Hill or the hills west of I-35, a slide gate often becomes the only practical option, and that adds cost.
- Driveway width. A single 12-foot gate is straightforward. Wider driveways in Keller or Southlake areas sometimes need a bi-parting setup with two gate leaves, two operators, and double the wiring. That can add $1,500 to $3,000.
- Automation and access control. A basic remote-controlled operator runs under $2,000 installed. Add a keypad for guests, a vehicle loop detector buried in the driveway, or a phone-based intercom, and the electronics portion climbs quickly. Dallas HOAs in gated communities often require specific intercom or call-box systems, which narrows your choices and raises cost.
- Permits and property details. The City of Dallas requires a permit for most driveway gate installations, especially when electrical work is involved. Some suburban cities like Plano and McKinney have their own requirements. Historic districts add review time. Setbacks from the street matter too. All of this affects the schedule and the final invoice.
- Existing fence and column condition. If the brick columns are sound, mounting hardware to them is straightforward. If the previous gate pulled the columns out of plumb, or if the fence line has shifted with the clay soil we have across DFW, the job needs structural correction first. That’s not a hidden fee. It should be written into the quote before the crew starts.
Is It Cheaper to Repair a Gate or Install a New One?
Repairing a gate in Dallas usually costs between $180 and $700 when it involves hinge replacement, weld repair, or a motor tune-up. If the gate frame is rusted through at the bottom rail, or the gate operator failed and the gate itself is more than 15 years old, replacement starts making more sense. The rule of thumb: if repair costs exceed 50% of new gate pricing, it’s time to replace. We’ll tell you straight if your gate is worth saving. That’s part of the written estimate, not an upsell.
How to Save on Gate Installation
You don’t need to buy the cheapest gate to get a fair price. You need a clear scope of work and a written price before the job starts. Here’s how to keep a Dallas gate installation within reason:
- Get a written price, not a ballpark. A quote that lists the gate, posts, operator, wiring, permit, and labor as separate line items protects you from number-creep. If a contractor won’t put it in writing before work begins, walk away.
- Match the operator to the gate weight. Undersizing the motor kills it within a few years. Oversizing wastes money. A properly matched operator lasts longer and avoids a second service call.
- Do the demo yourself only if the old gate is manageable. Removing a rusted steel gate is heavy work with real injury risk. If you’re not set up for it, the $150 to $500 haul-away fee is worth it.
- Plan for access control up front. Running conduit and wiring for a keypad during installation is cheap. Adding it later means trenching and patching, which costs more. If you think you might want a keypad in two years, wire for it now.
- Ask about the guarantee in writing. Carver Gate Repair puts a 365-Day Done Right Promise on every installation. If something isn’t right, we come back at no charge within the guarantee window. That’s written into the agreement, not whispered as a sales line.
Call (940) 531-9746 for a free estimate. We’ll give you a written price before any work starts, and that number won’t move when the crew shows up.
Why Choose Carver Gate Repair for Your Dallas Installation
Lonnie Burke runs Carver Gate Repair Dallas to a specific standard, and that standard has a name: The Garrison Standard. It’s been in place since 2008 under the Garrison Partners family of home service companies. The rules are simple and they’re non-negotiable.
Every technician who steps onto your property is background-checked and wearing a uniform. You’ll know exactly who you’re letting through the gate. Every job gets a written price before work starts. Every repair and installation carries a full-year guarantee. If the gate fails inside that year, the second visit is free. No charge, no argument.
Phones are answered by a live person around the clock. Not a voicemail box. Not a call-back queue. You call, a person picks up, even at 2 a.m. on a holiday. That matters when your gate is stuck open and your dogs are inside.
We work on nine gate operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we don’t show up to install a gate and tell you we can’t integrate with the opener already mounted on your column. We match the right parts to the system you’ve got.
Start with our home page to understand the full scope of what we do. Then look at the specifics of Gate Installation in Dallas to see how we approach each job.
FAQs – Gate Installation Cost
How much does a basic driveway gate cost in Dallas?
A basic steel Driveway Gate without automation runs $2,800 to $5,500 installed in Dallas. That includes the gate panel, steel posts set in concrete, hinges, latch, and labor. Adding any automation pushes the total up from there. Call (940) 531-9746 for a written quote specific to your driveway.
How much does an automatic gate cost in Dallas?
An automatic gate installation in Dallas runs $6,000 to $12,000 for most residential jobs. That covers a steel or aluminum gate, a swing or slide operator from a brand like LiftMaster or FAAC, wiring, one or two remotes, and a keypad. High-end intercom systems and vehicle loops add $1,500 to $4,000.
Can you install a gate the same week I call?
Yes, in most cases. Carver Gate Repair Dallas schedules installations within 3 to 7 business days, depending on gate availability and permit timing. If your gate is damaged and the property is unsecured, we prioritize same-day or next-day temporary fixes. Call (940) 531-9746 and a live person will get you on the schedule.
Is a permit required for gate installation in Dallas?
Yes, the City of Dallas requires a permit for most gate installations, particularly when an automatic operator involves electrical work. Cost runs $75 to $300 depending on the scope. We handle the permit paperwork as part of the installation, and the fee is itemized in your written estimate.
What’s the warranty on a new gate installation?
Carver Gate Repair Dallas gives a full-year written guarantee on every installation. If anything isn’t done right, we return and fix it at no charge within 365 days. The gate hardware and operator also carry manufacturer warranties, which we’ll document for you at completion.
Get a Written Price for Your Gate Installation in Dallas
You shouldn’t have to guess what a gate costs. Call (940) 531-9746, tell us what you’re working with, and we’ll give you a written estimate. A live person answers. A uniformed, background-checked technician shows up. And the price on the paper matches the price on the invoice. That’s the whole job.
Pricing reflects the Dallas market as of 2026. Carver Gate Repair Dallas offers free estimates – call (940) 531-9746.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, operating to The Garrison Standard since 2008.
What Our Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.