Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPedestrian Gate in Dallas, TX
A pedestrian gate is a separate, people-sized entrance built alongside your driveway gate, so you don’t have to open a 20-foot vehicle gate just to grab the mail or let a visitor through. In Dallas, where most homes with automatic gates sit on lots that run deep from the street, a well-built pedestrian gate keeps daily foot traffic moving without cycling the big operator dozens of times a day. Carver Gate Repair Dallas designs, installs, and repairs these gates to the same standard we apply to every Gate Installation in Dallas job: written pricing before work starts, background-checked technicians, and a full-year written guarantee. If you’re weighing whether a pedestrian gate makes sense for your property, call us at (940) 531-9746 and we’ll walk you through the options in plain terms.
Lonnie Burke runs our Dallas location and has spent years working on gates that other contractors installed poorly. The pattern is consistent: undersized posts, hinges that sag within a season, latches that don’t line up after the first hard rain. A pedestrian gate takes more daily use than a Driveway Gate, so the details matter twice as much. We build them like the rest of the gate system depends on them, because it does.
Key Takeaways
- A pedestrian gate costs $900 to $3,800 installed in Dallas, depending on material, width, and hardware.
- Most installations take one to two days, including concrete footings and hardware alignment.
- Every job comes with a written price before work starts and a written one-year guarantee.
- Our technicians are background-checked and uniformed on every visit.
- Phones are answered by a live person 24/7, including weekends and holidays.
When You Need Pedestrian Gate
Not every home needs one. But in Dallas, there are clear signs a pedestrian gate is the right call. Here’s what we see most often when homeowners call us about adding or replacing one:
- You open the driveway gate for foot traffic daily. Every cycle wears the operator, the hinges, and the limit switches. A separate pedestrian entrance cuts that wear dramatically.
- Your current pedestrian gate sags or scrapes the ground. In Dallas clay soil, posts shift with moisture swings. If the latch no longer catches or the gate drags across the concrete, the frame was likely set too shallow or without proper concrete.
- Package deliveries and utility workers need access. A locked driveway gate stops everyone. A pedestrian gate with a keypad or intercom lets UPS, USPS, and meter readers in without giving them vehicle access.
- You want a coded entry point for family or staff. Many Dallas homeowners in Preston Hollow, Lakewood, and the M Streets add pedestrian gates with keypads so kids, landscapers, and housekeepers can come and go without a remote.
- The driveway gate opens onto a busy street. If cars back up while the gate cycles, a pedestrian gate keeps foot traffic out of that dangerous wait.
- Your existing pedestrian gate was built as an afterthought. We replace gates hung on 4×4 wood posts, gates with residential-grade hinges on steel frames, and gates that were never fitted with a proper self-closing mechanism.
Our Pedestrian Gate Process
We follow the same sequence on every pedestrian gate, whether it’s a new install or a replacement. Here’s how it goes:
- Site walk and measurements. We check the opening width, the ground slope, the post condition if reusing, and what’s beneath the surface. In Dallas, that means accounting for clay soil that expands and contracts through the summer-to-winter moisture cycle.
- Written quote with exact numbers. You get a line-item price before any work is scheduled. Material, hardware, concrete, labor, and any electrical for keypad or maglock are on the page. The number at the door matches the number on the quote. That’s The Garrison Standard, and it’s non-negotiable.
- Footings and posts. We dig to a depth appropriate for the gate weight and soil condition, then set posts in concrete with proper curing time. No shortcuts here. This is where most pedestrian gates fail within a year or two of installation by other contractors.
- Gate fabrication and hang. We match the gate to the existing fence or driveway gate style where possible, then hang it on bearings rated for the true gate weight. Self-closing hinges or a spring system go on at this stage.
- Hardware, latch, and access control. We install the latch, lock, keypad, or intercom per the agreed scope. If you have a FAAC or BFT operator on the driveway gate, we can integrate the pedestrian keypad with the same access system so one code works for both entrances.
- Alignment, test, and cleanup. We open and close the gate dozens of times, check the reveal gaps, confirm the latch catches cleanly, and walk you through operation. We leave the site the way we found it, minus the old gate if we hauled it off.
Every step is covered by the 365-Day Done Right Promise. If something isn’t right within the guarantee year, we come back at no charge. That’s in writing on every job.
Pedestrian Gate Pricing in Dallas
Pedestrian gate installation in Dallas typically runs $900 to $3,800. The spread comes down to material, size, and whether you’re adding access control. Here’s a practical breakdown based on the jobs we quote most often:
| Scope | Typical Range |
|---|---|
| Standard steel pedestrian gate (4 ft wide, new posts) | $900 – $1,500 |
| Aluminum or ornamental steel gate, custom height | $1,200 – $2,200 |
| Full replacement with new posts, concrete footings, hardware | $1,400 – $2,400 |
| Add keypad entry (standalone) | $500 – $1,000 |
| Add intercom or video access tied to driveway gate system | $800 – $1,800 |
| Pedestrian gate with matching design to existing driveway gate | $1,500 – $3,800 |
What drives cost more than anything is the post work. If we’re reusing existing posts that are plumb and properly set, the job is faster and cheaper. If we’re pulling rotted posts or breaking out old concrete, labor goes up. In East Dallas and around White Rock Lake, where many lots have older gates with undersized posts, we often replace the post and the gate together rather than hanging a new gate on a failing foundation.
Hardware also matters. A self-closing hinge rated for continuous use costs more than a basic barrel hinge, but it’s the difference between a gate that still latches in year three and one that swings loose in the wind. We spec hardware based on the gate weight, not the cheapest option on the shelf. If you have a Linear or Viking operator on your driveway gate, we can match the pedestrian gate’s access hardware so everything works from one keypad or remote.
Estimates are free. Call (940) 531-9746 and we’ll give you a written price you can hold us to.
FAQs – Pedestrian Gate
How much does a pedestrian gate cost in Dallas?
A pedestrian gate in Dallas costs $900 to $3,800 installed, with most standard steel gates landing between $1,200 and $2,400. The final number depends on material, gate width, whether new posts are required, and whether you add keypad or intercom access. Call (940) 531-9746 for a free written estimate with exact line-item pricing for your opening.
Can you install a pedestrian gate next to my existing driveway gate?
Yes. We install pedestrian gates as standalone entries or matched to existing driveway gate systems. If your driveway gate runs on a FAAC, BFT, Linear, or Viking operator, we can integrate the pedestrian keypad with the same access system so one code works for both entrances.
How long does pedestrian gate installation take?
Most pedestrian gate installations in Dallas take one to two days from start to finish. Concrete footings need time to cure before the gate is hung and final hardware is set. We’ll give you a clear timeline on the written quote before any work starts.
Do you repair pedestrian gates or only install them?
We repair pedestrian gates as often as we install new ones. Sagging gates, misaligned latches, broken self-closing hinges, and failing keypads are all standard repair work. If the gate is repairable, we’ll tell you. If the posts are compromised or the frame is too far gone, we’ll quote a replacement instead and explain why. Call (940) 531-9746 and we’ll send a technician to look at it.
Can you match the pedestrian gate to my fence style?
Yes. We can fabricate or source pedestrian gates to match most residential fence styles common in Dallas, including ornamental steel, horizontal picket, and aluminum designs. We’ll match the height, the rail pattern, and the finish so the pedestrian gate reads as part of the fence line rather than an add-on.
Contact Carver Gate Repair Dallas
If you’re considering a pedestrian gate for your Dallas home, or the one you have is sagging, sticking, or no longer latching, call our Gate Installation services team at (940) 531-9746. You’ll get a live person on the phone, day or night. We’ll schedule a site visit, put a written price in your hand, and do the work under The Garrison Standard: background-checked technicians, a clean site, and a full-year written guarantee on every repair and installation. No moving numbers, no no-shows.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Dallas.