Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Mesquite
Gate installation in Mesquite runs $1,200 to $4,800 for most residential driveway gates, with electric operators adding $900 to $2,600 depending on the motor and safety equipment required. We serve every corner of Mesquite, from Creek Crossing to Valley Creek and east toward Lawson Road. Our crews know the 1970s-era brick ranches with original iron gates, the newer steel gate subdivisions off Cartwright Road, and everything in between. Call (940) 531-9746 for a written quote before any work starts.
What makes gate work different in Mesquite is the soil under the post. More on that below, because it drives most of the cost decisions you’ll face.
Why Carver Gate Repair Dallas Is Mesquite’s Preferred Gate Installation Company
Our Gate Installation team works from a written standard that homeowners in Mesquite have come to expect: a price on paper before the first hole is dug, background-checked and uniformed technicians on site, and a 365-day written guarantee on every repair and installation. That guarantee is not a handshake. It’s in writing, good for a full year, and if something fails inside that window, the second visit is free. No charge, no argument.
Lonnie Burke runs our Mesquite service area and has spent years working on the city’s legacy gate stock. The 1970s through 1990s homes here were built with a particular kind of gate: wrought iron or chain link on shallow post footings, often with operators that predate modern safety codes. Lonnie’s crews know which of those gates can be retrofitted and which are past saving. That matters when the difference is $600 in hinge work versus $3,800 in full replacement.
Response time to Mesquite is same-day for most gate repair calls and within 24 hours for installation estimates. When a gate is stuck open or stuck shut, you need a live person on the phone. Our phones are answered 24/7, including weekends and holidays, by a real person, not a voicemail queue. Call (940) 531-9746 and someone picks up.
Styles & brands we work with
Gate Installation Services in Mesquite
Gate Installation Services in Mesquite cover everything from a single pedestrian gate to double driveway gates and sliding gates on steel track. The job starts with measuring the opening, checking the ground where posts will sit, and deciding whether the existing post footings can be reused. In Mesquite, that last step is where most installs get complicated. A gate hung plumb in March may fail to latch by August. We set posts accordingly.
For a standard single swing driveway gate, Mesquite homeowners typically pay $1,200 to $2,800, including the gate, posts, hinges, and labor. Double gates run $2,400 to $4,800 because both leaves need to be fabricated, hung, and aligned to meet in the center. Pedestrian gates are the lightest job, usually $600 to $1,400 installed, and we do a lot of those for side yards and pool access gates.
Driveway and Security Gates
Most Mesquite homes on wider lots off Oates Drive or Belt Line Road were built with wide driveways that fit a twelve to sixteen foot gate opening. We install both swing and sliding configurations. Sliding gates work well on properties where the driveway slopes toward the house, since a swing gate would drag on the high side. Security gates with keypad or intercom entry are common in the newer subdivisions east of I-635.
Replacing an Old Gate
When the existing gate has rusted through at the hinge welds or the frame is twisted, repair is not always the right answer. We’ll tell you straight if the steel is worth saving. If not, we quote a replacement gate built to current standards, with a deeper post footing and modern hinges designed for the soil movement we see across Mesquite.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Mesquite
Electric Gate Installation in Mesquite means adding a motorized operator to a swing or sliding gate, running power to the operator, and installing the safety devices required by UL 325. Homeowners here typically pay $900 to $2,600 for the operator and installation, depending on whether we’re matching an existing system like a LiftMaster or FAAC, or starting fresh. The safety package, photocells, edge sensors, and the control board, is part of the quote, not an add-on.
Many Mesquite homes built before the mid-1990s have electric gates with no entrapment protection at all. Those older operators, mostly Linear and Mighty Mule units, will run a gate until something breaks, but they don’t meet current safety code. We’ll retrofit where it makes sense and replace when it doesn’t. Either way, the gate leaves this property meeting the standard.
Operators and Safety Systems
We install swing arm operators for gates that open inward or outward on hinges, and slide operators with a chain or rack drive for gates on track. Every electric install includes at least one set of photocells across the gate opening. On a driveway gate, that photocell is what keeps the gate from closing on a car or a kid. We test it in both directions before we leave.
Solar and Low-Voltage Options
For Mesquite gates set back from the house or where trenching new power would cut through mature landscaping, we install solar operators. Ghost Controls and Mighty Mule both make solar-ready swing operators that work well in the Dallas area’s sun. Solar is not right for every gate, especially shaded lots with heavy tree cover, but on an open south-facing driveway it keeps the install clean and avoids a costly electrical trench.
Trusted Brands We Service in Mesquite
Our technicians are trained on nine gate motor brands, so when we show up in Mesquite we’re not reading the manual. We stock common parts locally for LiftMaster, FAAC, Elite, and Mighty Mule systems, which covers most of what’s installed in the city’s older subdivisions. If your operator is a Viking or a DoorKing from the 1990s, we can still source the control board, but we’ll be honest about whether replacing the operator is the smarter money. Parts for a twenty-year-old board often cost more than a new operator that carries a warranty.
Common Gate Installation Problems We See in Mesquite Homes
- Post lean from expansive clay. Mesquite’s clay soil swells when it rains and shrinks during the hot, dry summer. A post set in an 18-inch footing with no rebar will lean enough to stop the latch from engaging. We see it on nearly every older gate we touch.
- Pre-UL 325 operators without entrapment protection. Gates installed before the mid-1990s often have operators that will crush an obstruction rather than reverse. These cannot be made code-compliant by adding a sensor, the board itself has to be replaced or the operator retired.
- Rusted hinge post welds on ornamental iron. Forty years of North Texas heat and humidity eats through the weld where the hinge meets the post. The gate may look solid, but if the hinge weld is cracked, the gate is one hard push from dropping.
- Heat and storm damage to control boards. Surge from summer thunderstorms and sustained 100-degree heat both kill control boards. A gate that works in the morning and won’t move by 3 p.m. on a July afternoon is usually a board that has thermally failed.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Mesquite, TX
Here are real numbers for the Mesquite market. A single swing driveway gate installed runs $1,200 to $2,800. A double swing gate runs $2,400 to $4,800. Adding an electric operator is $900 to $2,600 on top of the gate itself. A full electric gate package, gate, operator, safety system, and installation, typically lands between $2,200 and $6,500 in Mesquite, depending on gate width, operator type, and whether we’re digging new footings.
The biggest cost variable on this page is the post footing. Older Mesquite gates sit on shallow footings that fail. When we install, we dig deeper, 36 inches minimum, with a rebar cage. That costs more up front and it’s why our gates stay plumb through the summer. You get a written price before we start. The number on that page is the number you pay.
We Also Serve Cities Near Mesquite
Our crews cover the full Mesquite service area plus the surrounding cities. We run installation and repair calls in Irving, Dallas, Lancaster, and DeSoto on the same schedule. If you’re in one of those cities, call (940) 531-9746 and we’ll route the nearest available technician.
Serving Mesquite, TX - Our Local Coverage Area
We’re based in the Mesquite area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Mesquite
Most 1980s operators cannot be retrofitted to meet current UL 325 entrapment standards because the control board itself lacks the necessary inputs for modern photocells and edge sensors. In those cases replacement is the only code-compliant option, and we’ll quote a new operator like a LiftMaster LA400 or FAAC swing arm with the full safety package. Call (940) 531-9746 and we’ll inspect your existing operator and tell you which path is cheaper.
Your gate is telling you the post footing is too shallow for Mesquite’s expansive clay. When the soil dries out in summer, it shrinks and the post leans away from the gate, misaligning the hinges and latch. Rain rehydrates the clay and the post settles back. The fix is a deeper footing with a rebar cage, not a hinge adjustment, otherwise you’ll be calling us again next August.
We set gate posts at 36 inches minimum in Mesquite, with a rebar cage and concrete poured below the frost line and through the active clay zone. Anything shallower will move with the seasonal swell and shrink cycles this city sees every year. The 18-inch footings common on 1980s gates are exactly why we get so many misalignment calls after storms.
Yes, solar gate openers from Ghost Controls and Mighty Mule work on many of the older swing gates around Mesquite, and they avoid the cost of trenching conduit across a yard. The tradeoff is battery capacity during long cloudy stretches and shaded lots. For a sun-exposed driveway, solar is a solid option and we’ll quote it alongside a hardwired install so you can compare the real numbers.
Often yes, if the gate frame is still straight and the rust is limited to the post and hinge welds. We cut out the old post, set a new steel post at a proper depth, and rehang the original gate with new hinges. If the gate frame itself has rusted through where the hinges attach, saving it usually costs more than replacing it, and we’ll show you both numbers side by side.
Same-day in most Mesquite neighborhoods, including Creek Crossing, Valley Creek, and the subdivisions off Lawson Road. Emergency gate calls, a gate stuck open with a pet inside the yard, or a gate stuck shut with a car trapped in the driveway, get priority. Call (940) 531-9746 and a live person will dispatch the nearest technician.
Call Carver Gate Repair Dallas for Gate Installation in Mesquite
If you need a new gate, an electric operator, or an honest opinion on whether your 1980s gate is worth saving, call (940) 531-9746. We’ll schedule a free estimate, send a background-checked technician, and hand you a written quote before any work begins. The Garrison Standard applies to every job we do in Mesquite: written prices, clean work sites, and a 365-day guarantee in writing.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Mesquite and the surrounding area.