Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Highland Park, TX
Highland Park gate work comes down to precision. The homes here are large, custom-built, and often fronted by heavy wrought iron or solid wood gates that were designed to match a Georgian, Tudor, or Mediterranean facade. A repair that would be straightforward in a neighboring city involves matching aged hardware, working around mature landscaping, and interfacing with access control systems that many generalist technicians have never touched. We run every Highland Park job to a written price, a background-checked crew, and a full-year guarantee. If a gate is stuck, sagging, or refusing a command, call Carver Gate Repair at (940) 531-9746.
Why Highland Park Homes Are Different
Highland Park’s housing stock skews toward sprawling custom estates, and the gates on those properties tend to be built to match. We regularly work on gates that weigh three or four times what a production steel gate weighs, hung on posts set into clay-heavy soil. That soil is the recurring problem. In winter, freeze-thaw cycles cause concrete around gate posts to shift, which throws the gate out of alignment and puts strain on the hinges and motor. In summer, heat and humidity warp wood panels and blister paint, and hail from spring thunderstorms chips powder coating off steel frames.
The other difference is the electronics. Many Highland Park gates are tied into whole-home systems that control lighting, cameras, and entry from a single interface. That means a gate repair call often starts with a question about how the gate talks to the rest of the house, not just why it stopped moving. Our technicians are trained on the access control interfaces common in this area, and we’re prepared to work alongside the integrator or homeowner who manages the property’s broader automation. The gate itself still gets the same treatment: measured tolerances, the right hardware, and a written price before any work begins.
Styles & brands we work with
Our Main Highland Park Services
Most calls we take from Highland Park fall into two categories: a gate that has stopped working, and a motor or access system that needs diagnosis and repair. The third, a full gate installation, comes up when a property is being renovated or an existing gate is beyond reasonable repair.
Gate Repair in Highland Park
A sagging gate in Highland Park is rarely a single problem. It is usually a combination of a worn hinge, a post that has shifted, and a motor that has been fighting the extra load for months. We approach it that way. The repair includes realigning the gate, replacing or rebuilding the hinges as needed, and checking the operator so it isn’t left pushing against a misaligned track. On older custom gates, we match hardware to the existing design rather than bolting on whatever is in the truck. The full breakdown of what this job includes, and what it costs in Highland Park, is on the Gate Repair in Highland Park page.
Gate Installation in Highland Park
New gate work in Highland Park usually means matching a design language that is already established on the property. We measure the opening, check the post foundations, and specify a gate that the existing or planned operator can actually move. That last point matters more than people expect: a heavy custom gate needs a motor rated for it, not just a motor that fits. Installation includes the frame, the hinges, the operator, and any safety edges or photo eyes required by code. For the full scope and written pricing, see Gate Installation in Highland Park.
Gate Motor Repair in Highland Park
When a gate motor fails in Highland Park, the first thing we do is identify whether the problem is the motor itself or the accessory telling it what to do. It’s common to find a limit switch that has drifted out of adjustment, a loop detector that no longer sees the car, or a control board that has been fried by a nearby lightning strike. We service and stock parts for the major motor brands found in this area, including LiftMaster, DoorKing, and Elite. The specific repair process and Highland Park pricing are laid out on the Gate Motor Repair in Highland Park page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Highland Park
We carry stock parts for LiftMaster, DoorKing, Elite, and Mighty Mule systems, which covers the majority of operators installed across Highland Park. When a board or limit switch fails, having the right component on hand means we can often complete the repair in a single visit. For a wider look at what we support, see our brands.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Highland Park, TX
| Service | Typical range in Highland Park |
|---|---|
| Gate repair (minor, hinge or latch) | $175 – $350 |
| Gate repair (major, structural or post) | $450 – $1,200 |
| Gate installation (standard steel or wood) | $2,500 – $6,000 |
| Custom gate installation | $6,000 – $15,000+ |
| Gate motor repair | $225 – $600 |
| Gate motor replacement | $800 – $2,200 |
| Access control / keypad install | $450 – $1,100 |
Prices in Highland Park run higher than the metro average primarily because the gates are heavier and the finishing standards are stricter. A custom wrought iron gate that must match existing railings takes longer to repair or fabricate than a stock panel from a supply yard. Every job gets a written price before work starts, and that price does not change once we begin.
Neighborhoods We Serve in Highland Park
We work throughout Highland Park, from the larger estates near Lakeside Drive to the streets around Armstrong and Flippen Park. Response times are typically same-day or next-day for repair calls, depending on when the call comes in and what parts the job is likely to need. Specific neighborhoods include:
- Lakeside Drive area
- Armstrong Parkway
- Bordeaux Avenue
- Flippen Park
- Highland Park West
Service Area – Cities Near Highland Park
While this page covers Highland Park specifically, our crews also run calls in the surrounding metro. If your property sits just outside Highland Park, you can check the relevant page: Dallas, TX, Irving, TX, Carrollton, TX, or Mesquite, TX. Dispatch is coordinated from our Dallas-Fort Worth office, and crews serve Highland Park locally.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Highland Park
Yes. Many Highland Park gates are tied into whole-home access control, and we routinely interface with the proprietary software those systems use. We coordinate with the homeowner or the system integrator so the gate and the house stay on the same page after a repair.
Highland Park has design review standards for exterior work, and some properties fall under additional HOA rules. We do not handle permit filings, but we can provide specifications and drawings that a homeowner or contractor can submit. We recommend confirming requirements before scheduling a new installation or a major structural repair.
Most repair calls in Highland Park are scheduled same-day or next-day. Motor diagnosis and repair may take an extra day if a specific board or part has to be ordered, though we stock the most common components locally. Call (940) 531-9746 and a live person will schedule the visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Highland Park Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.