Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Highland Park
Gate installation in Highland Park is a different job than it is almost anywhere else in the DFW metro. You’re not hanging a standard panel between two posts. You’re fabricating and setting a heavy custom gate, often iron or solid wood, on a lot where the clay soil moves with every rain, where wind loads push hard against tall solid infill, and where the finished work has to hold its own on a multi-million dollar property. We get that. Carver Gate Repair Dallas installs driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates across Highland Park with written pricing before any work starts, a full-year written guarantee, and technicians who work on nine major operator brands. Call (940) 531-9746 for a free estimate.
Key Takeaways:
- Highland Park gate installation typically runs $4,800 to $14,000+ depending on gate type, material, automation, and post work.
- Storm exposure, expansive clay, and wind load on solid infill gates demand heavier posts and deeper footings than standard Dallas work.
- We interface with Crestron, Control4, and other access control platforms common in Highland Park estates.
- Every job includes a written price before work starts and a written 365-Day Done Right Promise on the installation.
Why Carver Gate Repair Dallas Is Highland Park’s Preferred Gate Installation Company
Homeowners in Highland Park tend to be specific about what they want, and they have reason to be. A gate that sags six months after install, or an operator that fails the first time a storm knocks out power, is not a small annoyance here. It’s a visible flaw on a home built to a standard. Our crews work to The Garrison Standard: background-checked, uniformed technicians, a written price delivered before any work begins, and a guarantee in writing on every job. That process matters in Highland Park, where the gates themselves are often custom and the expectations around them are higher than anywhere else we serve.
We are part of the Garrison Partners family and have operated to The Garrison Code since 2008. Every installation is backed by the 365-Day Done Right Promise. If something is not right within a full year, we return and make it right at no charge. No invoice growth after the fact. No arguing about what “done” means. That is the floor, not the ceiling.
Lonnie Burke runs the Carver Gate Repair Dallas operation with a simple rule: the price quoted is the price you pay, agreed before any work starts. If you have dealt with a gate contractor who quoted one number and billed another, that sentence matters. We answer the phone with a live person 24 hours a day, seven days a week. You will not get a voicemail box when your gate is stuck closed on Lakeside Drive at 9 p.m. during a storm.
Styles & brands we work with
Gate Fabrication in Highland Park
Gate fabrication in Highland Park means building a gate to match the architecture it sits in front of, not pulling something off a catalog page. Many of the homes here are Georgian, Tudor, or Mediterranean in style, and the gates were never meant to be interchangeable. A fabricated gate has to carry the same proportions, the same ironwork details, and the same weight characteristics as the original design, while being built square enough to automate reliably. Our Gate Installation team fabricates gates to spec, then installs and automates them as one continuous job, which avoids the finger-pointing that happens when a fabricator and an installer are two different companies. Highland Park fabrication work typically runs $6,500 to $18,000 depending on material, size, and detailing. A wrought iron double driveway gate with basic automation usually lands between $9,000 and $14,000, including posts and operator.
Custom Iron and Wood Gates
Highland Park has more solid wrought iron and solid wood gates than almost any nearby city. That changes the engineering. A solid infill gate catches wind like a sail, and that load goes straight into the hinge posts. We size posts and footings for that load, not for the gate’s resting weight.
Wood gates on estates here often get built from cedar or mahogany to match the house. We build them with internal steel frames when they will be automated, because an all-wood gate flexes and warps in Highland Park’s humidity, and a warped gate will eat operator gears.
Fabrication for Existing Architectural Styles
If your home is a 1920s Tudor on Beverly Drive or a Mediterranean estate near Armstrong Parkway, the gate has to read as original to the property. We have fabricated replacements that homeowners’ associations and neighbors could not distinguish from the original ironwork. The goal is not a new statement piece. It is a gate that looks like it was always there and now opens perfectly.
Automatic Gate Installation in Highland Park
Automatic gate installation in Highland Park is where the detail work lives. The gate itself may be beautiful, but the operator, loops, safety edges, and control wiring determine whether it works every single day for a decade or fails during the first hard storm. We install swing operators, sliding operators, and hydraulic systems from DoorKing, LiftMaster, Elite, and Mighty Mule, matched to the gate’s weight, panel type, and how often it cycles. A complete automatic gate installation in Highland Park, including operator, loops, photocells, keypad, and two remotes, generally runs $7,500 to $15,000. The operator itself is usually $2,200 to $4,800 of that, installed, depending on capacity and brand.
Smart Home Integration
This is a skill set that matters more in Highland Park than almost anywhere else in Texas. A large share of the gates here tie into Crestron or Control4 systems, and those are closed software ecosystems. If a technician does not know how to interface the operator with the existing system, the gate becomes a stand-alone device instead of part of the house. Our technicians work inside those platforms so the gate responds to the same app or panel the homeowner already uses.
We also run the wiring properly: conduit for future upgrades, proper weatherproof junctions, and enough spare conductors to add a camera or intercom later without trenching the driveway twice.
Photocells, Loops, and Safety Edges
Every automated gate has to meet UL 325 safety standards. That means photoelectric sensors, monitored safety edges where the gate could pinch, and free-exit loops or pressure pads on the driveway side. Highland Park lots are often deep, so loop placement matters: a loop set too close to the gate causes the gate to reopen when a car is already through, which wears out the operator. We set loops at the correct distance for the gate’s speed and swing arc.
Trusted Brands We Service in Highland Park
We install and repair LiftMaster, DoorKing, Elite, Mighty Mule, FAAC, BFT, Linear, Viking, and Ghost Controls operators. Highland Park homes skew toward LiftMaster for residential use and DoorKing or Elite for heavier custom gates, so those are the parts we keep on the truck when we dispatch to this area. If your existing gate runs a different brand, we service it too and can repair or replace it without ripping out the whole system. The point is matching the operator to the gate, not selling you whatever happens to be on the shelf.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Installation Problems We See in Highland Park Homes
- Post lean from saturated clay: Highland Park sits on expansive clay that softens after heavy rain. A solid iron gate on a hinge post set in soft ground will start to lean within a season, throwing the operator’s rack and pinion out of alignment. We set posts in concrete footings sized for gate weight plus wind load, not minimum code.
- Wind load on solid infill panels: A tall solid gate with no openings catches a lot of wind. Over time that force works the hinge bolts loose and stresses the operator. We see this most often on double gates, where the center play compounds over months.
- Power outages locking the gate shut: When storms knock out power, an automatic gate without a working manual-release mechanism is a locked box. Homeowners here get stuck outside their own driveway, or they force the gate and damage the operator. Every install includes a documented manual-release procedure.
- Shallow footings from the last guy: If your gate was installed by a generalist contractor, the posts were probably set at the minimum depth on the spec sheet. Freeze-thaw cycles in winter then heave the post slightly, and the photocells misalign. The gate works, then does not, then works again. That is a shallow-footing signature.
Pricing for Gate Installation in Highland Park, TX
Here is what Highland Park homeowners can expect to pay for gate installation, based on the work we regularly do in this area.
| Gate Type | Typical Highland Park Cost Range | What’s Included |
|---|---|---|
| Single swing driveway gate (steel, automated) | $6,500 – $10,000 | Fabricated gate, posts, footings, operator, keypad, 2 remotes |
| Double swing driveway gate (steel, automated) | $9,000 – $15,000 | Two gate panels, heavy-duty posts, dual operators, loops, photocells |
| Sliding gate (steel, motorized) | $8,500 – $14,500 | Track or cantilever, slide operator, loops, safety edges |
| Pedestrian gate with lock and closer | $3,200 – $6,000 | Gate panel, posts, self-closing hinge set, lockset, install |
| Custom fabricated iron gate (ornate, no automation) | $6,500 – $18,000 | Design, fabrication, primer and finish, structural posts, install |
| Operator-only replacement on existing gate | $2,200 – $4,800 | Operator, installation, wiring, adjustment, programming |
These are installed prices, not estimates that grow at the door. You will receive a written price before any work starts, and that is the number on the invoice. The main variables are gate weight, material, automation brand, and how much post work the existing conditions require. Call (940) 531-9746 and we will walk you through a straight answer for your specific lot and gate.
We Also Serve Cities Near Highland Park
Our crews run installation and repair calls throughout the immediate area around Highland Park. If you own property in Highland Park or in nearby Dallas, Irving, Carrollton, or Mesquite, the same written-price process and 365-Day Done Right Promise apply. Dispatch is coordinated from our Dallas-Fort Worth office, and Highland Park crews are on the road locally, not driving in from another county.
Serving Highland Park, TX - Our Local Coverage Area
We’re based in the Highland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Highland Park
Wind forces a solid infill gate to act like a lever against the hinge post, so the post and footing must be sized for the gate’s sail area, not just its dead weight. In Highland Park, we typically set 6×6 steel posts in concrete footings at least 36 inches deep for a solid double gate, and deeper on lots where drainage patterns saturate the topsoil. A standard 4×4 post in 24 inches of concrete will lean within one or two storm seasons. Call (940) 531-9746 and we will spec the right post for your gate design.
Every automated gate we install includes a manual-release lever on the operator. To open the gate during a power outage, find the release handle on the top or side of the operator housing, pull it until it disengages, and push the gate open by hand. Do not force the gate open while the operator is still engaged. That bends the rack, strips gears, and can crack the housing. After the control board is re-engaged, limit switches, photocells, and force settings must be checked, because a hard power interruption can corrupt the board’s memory. Call (940) 531-9746 if the gate does not reset cleanly, and we will dispatch a technician to your home.
Yes. We interface our operators with Crestron, Control4, Savant, and the other access control platforms we see regularly in Highland Park estates. The operator gets wired into the home’s existing control bus or dry-contact relay, then programmed so the gate opens from the same panel or app the homeowner already uses. This is a specific skill. A generalist contractor will often install a standalone keypad and call it done, which means you now run two systems. We integrate it properly. Call (940) 531-9746 for an evaluation of your existing system.
Nine times out of ten, it is either a shallow footing or a post that was not braced through the wet-dry cycle. Highland Park’s expansive clay swells when wet and shrinks when dry, and a post set in that movement will tilt. A gate that sags within its first year almost always means the concrete footing was undersized for the gate’s loaded weight, or the hinge plate was not through-bolted. We reset the footings, re-hang the gate, and square the operator alignment so it opens level. Call (940) 531-9746 to have the install inspected.
Yes. Any gate that will be automated with an operator must meet UL 325 safety standards. That means photoelectric sensors that detect a person or vehicle in the gate’s path, an inherent reversing mechanism, and monitored safety edges on any point where the gate could pinch. Compliance is not optional and not a warranty add-on. It is built into the installation. If a previous installer automated a custom gate without photocells or with the force setting cranked up to push through resistance, the gate needs correction. Call (940) 531-9746 and we will bring it to code.
After a severe thunderstorm in the Lakeside Drive area, a solid wrought-iron swing gate on an ornamental hinge post had shifted in saturated clay, throwing the gate operator’s rack and pinion out of alignment. Our crew reset the post footing, corrected the sag, and reprogrammed the LiftMaster operator to the home’s existing keypad entry, restoring smooth automated operation without disturbing the estate’s Tuscan facade. That is the kind of repair Highland Park calls for. The gate has to work, and it has to look like we were never there.
If you are planning a new gate or replacing a failed one in Highland Park, start with a phone call. We will ask about the gate type, the material, whether it will be automated, and what access system you currently use. Then Lonnie Burke and the Carver Gate Repair Dallas crew will give you a written price. You will know the number before we show up, and the guarantee is in writing. Call (940) 531-9746 for a free estimate.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Highland Park with the Garrison Standard.