Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in Dallas, TX
Hinge and post repair in Dallas typically costs between $300 and $900 for most residential jobs, with full post replacement running $600 to $1,800 depending on post type, concrete work, and gate weight. Most hinge repairs are completed in one visit, while post replacement usually takes a half day to a full day once concrete is ordered.
Hinges and posts carry the full weight of your gate every time it opens and closes. When they fail, the gate sags, drags, or stops latching. Carver Gate Repair Dallas fixes both the hardware and the foundation it sits on. We work on swing gates, driveway gates, and pedestrian gates across the Dallas metro, including neighborhoods like Lake Highlands, Preston Hollow, Oak Cliff, and far north suburbs like Plano and Richardson. If your gate is leaning or scraping, call us at (940) 531-9746 and we’ll get a technician out to look at it. For more on the full scope of what we handle, see our Gate Repair page.
We’re part of the Garrison Partners family, operating to The Garrison Standard since 2008. That means every job gets a written price before work starts, a background-checked uniformed technician on site, and a written guarantee good for a full year.
When You Need Hinge & Post Repair
Most hinge and post failures show up as visible sag or drag long before the gate stops working entirely. Here’s what homeowners in Dallas call us about most often:
- The gate drags on the ground at the latch end. A 1/4 inch of sag at the hinge post translates to several inches of drop at the opposite end of a 12-foot driveway gate.
- The gate scrapes the driveway when opening or closing. On Dallas clay soil, posts shift seasonally as the ground expands and contracts with moisture, and a gate that was fine in spring can drag by August.
- The gate won’t stay latched. Worn hinge bushings let the gate drop just enough that the latch no longer lines up with the strike plate.
- The post wobbles visibly when the gate moves. This is the one to address fast. A moving post stresses every other component, including the operator and the gate frame itself.
- The gate makes a grinding or popping sound at the hinge point. Metal-on-metal wear at the hinge pin or barrel means the hinge is failing, not just needing lubrication.
- The gate leans toward the street or the house. Leaning is a post foundation issue, not a hinge issue. Tightening hardware won’t fix it.
In neighborhoods with heavy clay soil, especially east Dallas and Mesquite, post settling is the most common call we run. The post itself is often still sound – the footing has simply lost its grip.
Our Hinge & Post Repair Process
We follow the same sequence on every hinge and post job. You’ll know the price before we start, and you’ll know what we found once we open the job up.
- Site walk and diagnosis. The technician checks hinge play, post plumb, gate weight, and the condition of the footing before making any recommendation.
- Written price delivered up front. You get a line-item price for parts, labor, and any concrete or fabrication work before anything gets touched. The number doesn’t move at the door.
- Hinge replacement or rebuild. We replace worn hinges in pairs or full sets, so the gate loads evenly. On ornamental steel gates, this often means cutting and welding new barrel hinges to match the original layout.
- Post reset or replacement. If the post has shifted, we pull it, inspect the footing, and reset it with new concrete at the proper depth. For rusted-through or cracked posts, we replace the post entirely.
- Gate re-hang and alignment. The gate is re-hung, leveled, and checked for clearance across the full swing arc. Latch alignment and any operator connections are tested before we leave.
- Cleanup and walkthrough. The site is left clean, and the technician walks you through what was done, what was replaced, and what to watch for over the next year.
Every step of that process is covered by The Garrison Code, which is the operational standard our crew runs on. No shortcuts, no “that’s good enough,” and no leaving a gate that works today but fails next season.
Hinge & Post Repair Pricing in Dallas
Here’s what homeowners in the Dallas area can expect to pay for common hinge and post repairs:
| Repair Type | Typical Dallas Price Range |
|---|---|
| Single hinge replacement (standard residential) | $120 – $260 per hinge |
| Full hinge set replacement (2-3 hinges) | $300 – $650 |
| Ornamental steel gate hinge weld & rebuild | $400 – $900 |
| Post straightening / re-setting (existing post, new concrete) | $500 – $1,200 |
| Full post replacement (steel or aluminum post) | $600 – $1,800 |
| Heavy driveway gate post replacement (steel, custom) | $1,000 – $2,500+ |
What moves the price: gate weight and length, whether the post is set in concrete or driven, access to the footing, and whether weld & rust repair is required. Gates on steeply sloped lots or retaining walls in areas like Lakewood or White Rock Lake often need additional blocking and longer cure times.
We give every Dallas customer a written price before work begins. No hourly billing surprises, no “we found something once we opened it up” upcharges without a conversation and your approval first. Estimates are free. Call (940) 531-9746 and we’ll schedule a technician to come out and measure.
Why Hinge & Post Work Matters for Your Gate Motor
A sagging gate puts load on the operator that it wasn’t designed to carry. We see it regularly in Dallas: a gate that drags on the hinge side makes the motor work harder on every cycle, which shortens the life of the Gate Repair in Dallas work we’d otherwise be doing on the operator itself. On swing systems using FAAC or BFT articulating arm operators, a dragging gate causes premature gear wear and can trip the safety sensors mid-cycle.
Fixing the hinge and post first is often what saves the motor. It’s the same reason we train our technicians on the gate structure before they touch the electronics – the mechanical foundation has to be right before the automation will be reliable. If you’re hearing a strained motor or seeing error codes on a Viking or Linear operator, the hinge and post condition is the first thing we check before any automatic gate repair work.
FAQs – Hinge & Post Repair
How much does hinge and post repair cost in Dallas?
Most hinge-only repairs in Dallas run $300 to $700, while post reset or replacement work runs $500 to $2,500 depending on the post type, gate weight, and concrete work involved. Call (940) 531-9746 for an exact quote – estimates are free, and the price is written down before any work starts.
Can you fix a leaning gate post without replacing it?
Yes, if the post itself is structurally sound. We pull the post, inspect it for rust or cracks, and reset it in new concrete at the proper depth with proper tamping, checking whether lock repair is also needed. In Dallas’s expansive clay soil, we also check drainage around the footing so the same shift doesn’t happen again in two years.
Is it cheaper to repair hinges or replace the whole gate?
Hinge and post repair almost always beats full replacement on cost. A complete gate replacement in Dallas typically starts at $2,500 and goes up quickly for custom steel or heavy driveway gates. If the gate frame itself is solid, repairing hinges and resetting posts usually comes in under half the cost of replacement and extends the gate’s life by years.
How fast can you get to a sagging gate in Dallas?
Same-day or next-day in most cases. Our phones are answered by a live person 24/7, not a voicemail box. Call (940) 531-9746 and we’ll get you on the schedule. A sagging gate is hard on both the gate and the operator, and the sooner we level it, the fewer components you’ll need to replace later.
Serving Dallas and the Surrounding Areas
Carver Gate Repair Dallas runs hinge and post repair calls across the Dallas metro. We work regularly in North Dallas, East Dallas, Oak Cliff, Lake Highlands, Richardson, Garland, Mesquite, Carrollton, and Irving, as well as the suburbs north of I-635. A background-checked, uniformed technician is dispatched on every call, and you’ll know exactly who you’re letting through the gate before they arrive.
If you’re not sure whether your problem is the hinge, the post, or something else entirely, start with a phone call. We’ll ask a few questions, tell you what we think you’re dealing with, and get a technician scheduled. No pressure, no obligation, and a live person answers the phone every time.
For more on the full range of gate system work, visit our home page to see what else we handle across Dallas.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Dallas.