Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterLock Repair in Dallas, TX
A gate lock that won’t throw, a key that spins without catching, or a latch that no longer lines up with the strike plate is a problem you can’t put off. In Dallas, gate lock repair typically runs $120 to $280 for common mechanical fixes, and most jobs are completed in a single visit. Carver Gate Repair Dallas handles lock repair for driveway gates, pedestrian gates, and estate entrances across the city, from Preston Hollow to Lakewood to Kessler Park. Call (940) 531-9746 and a live person answers, any hour, any day.
We’re the gate repair division of the Garrison Partners family, operating to The Garrison Standard since 2008. That means a written price before the first tool comes off the truck, a background-checked, uniformed technician on your property, and a 365-Day Done Right Promise in writing on every repair. If you’re dealing with a lock that’s fighting you, start with our Gate Repair in Dallas page for the full scope of what we do, or keep reading for the specifics on locks.
When You Need Lock Repair
Dallas heat and the region’s swing between dry summers and soaking spring storms put real stress on gate hardware. Steel expands, wood swells, and locks that worked fine in October bind up by June and may need weld & rust repair. Here are the situations where we’re called most often:
- The key turns but the gate won’t open. This usually points to a broken tailpiece inside the lock body or a misaligned strike plate. It’s not a lubrication problem, and spraying WD-40 won’t fix it.
- The latch won’t catch or hold. Gate posts settle over time in Dallas clay soil. In areas like East Dallas and Oak Cliff, we see post movement of a quarter-inch or more, which pulls the latch out of alignment with the strike.
- The lock is frozen or seized. Mineral buildup from hard water and years of dust will bind internal components. If the gate faces north or sits under heavy tree cover, moisture makes it worse.
- You need a rekey after a turnover. New house, previous owner, contractor, or property manager had keys. Our technicians rekey locks or install new cylinders so old keys stop working that same day.
- A key broke off inside the lock. We extract broken keys and assess whether the cylinder can be salvaged or needs replacement. Most of the time it’s a straightforward cylinder swap.
- The lock is loose, rattling, or visibly damaged. Forced entry attempts, years of slamming, or a gate that’s off its hinges will destroy lock internals. A loose lock is a fast route to a non-functional one.
How Much Does Gate Lock Repair Cost in Dallas?
Prices in Dallas for gate lock repair depend on the lock type, whether we’re repairing or replacing, and how far out of square the gate has gotten. Here’s what we quote in this market:
| Service | Typical Price Range |
|---|---|
| Lock cylinder replacement (standard keyed lock) | $120 – $180 |
| Rekey existing lock (including two keys) | $85 – $140 |
| Latch repair and strike plate realignment | $110 – $200 |
| Full lock body replacement (heavy-duty gate lock) | $180 – $280 |
| Electric lock or maglock replacement | $340 – $650 |
What moves the number: the condition of the gate post, whether the gate itself needs to be re-hung to make the lock work, and whether the existing hardware is a brand we can match directly. We carry parts for FAAC, BFT, Linear, and Viking systems, so in many cases we can replace a failed component with the correct original part rather than adapting something generic.
Every customer gets a written price before any work starts. That price holds. If the repair fails within a full year, the second visit is free under the 365-Day Done Right Promise. No argument, no re-quote. Call (940) 531-9746 for a free estimate on your specific gate.
Our Lock Repair Process
We run a disciplined process on every gate lock job in Dallas. It’s not complicated, but it’s consistent, and that’s the point. Here’s what happens when you call:
- You call (940) 531-9746. A live person picks up. You describe the gate and the lock issue. We schedule a window and confirm it with a call or text before we arrive.
- The technician arrives and assesses. Your technician is background-checked and in uniform. They inspect the lock, the latch, the strike, the post, and the gate alignment. What looks like a lock problem is often a gate-swing problem that ruined the lock, and we diagnose both.
- You get a written price. Before any work starts, you get the number on paper with the scope of work spelled out. This is The Garrison Code in action: the price does not move once it’s written.
- The repair is completed. We replace or repair the lock, rekey if needed, realign the latch and strike, and test the gate through full open and close cycles. We clean up the work area before we leave.
- You get the guarantee in writing. Every repair carries the 365-Day Done Right Promise. One full year from the date of service, covered in writing. If the work fails, the second visit is free.
Why Dallas Homeowners Call Carver Gate Repair
Most of our lock repair customers in Dallas have been through the cycle: a technician who no-shows, a quote that somehow doubles, a fix that fails in three months. That’s exactly what The Garrison Standard was built to put an end to. We’ve operated under it since 2008, and every Carver Gate Repair location, including home markets like Dallas, is bound to the same code: written prices, background-checked technicians, and a written guarantee with real teeth.
Lonnie Burke leads our Dallas operation with a straightforward standard: do the work correctly the first time, put the price in writing before touching the gate, and answer the phone when a customer calls. That’s not marketing language. It’s the operating rule we’ve used for better than 15 years.
Gate Lock Repair vs. Gate Motor Repair
It’s worth understanding the difference, because calling the right specialist saves time and money. A lock problem is mechanical: the key, the cylinder, the latch, the strike plate, or the physical bar that holds the gate closed. A motor problem is in the operator: the limit switch, circuit board, capacitor, or drive arm that moves the gate. Dallas homeowners often confuse the two, especially when an electric lock sits on a motorized gate.
Here’s a quick way to tell them apart: if you can open the gate with a key or a manual release and the gate swings fine, the motor is doing its job and the lock is the problem. If the motor hums or does nothing and the lock is open, it’s a motor issue. Our technicians handle both, and they’ll tell you plainly which one you’re dealing with. On brands like FAAC and BFT, an electric lock failure can look like a motor failure because the system won’t cycle if the lock doesn’t disengage. We trace that before recommending any repair, so you don’t pay for a motor board you didn’t need. For a deeper look at motor issues specifically, see our Gate Repair in Dallas page.
FAQs – Lock Repair
How fast can you get to my gate lock in Dallas?
We dispatch across Dallas and most surrounding areas with same-day availability on many lock repairs. Call (940) 531-9746 and a live person will tell you honestly what the schedule looks like for your specific neighborhood. We don’t route calls to voicemail, and we don’t make you wait until Monday if the gate won’t secure on a Friday night.
Is it cheaper to repair a gate lock or replace it?
For most standard keyed locks under $150, replacing the lock body is often the better long-term value than paying labor to disassemble and rebuild one that’s already failing. For higher-end electric locks like those on BFT or Viking systems, repair usually makes more sense because the parts are serviceable and replacement runs $340 or more. We’ll give you the repair price and the replacement price side by side before you choose. Call (940) 531-9746 for a written quote on your specific lock.
Do you work on electric gate locks and maglocks?
Yes. We service electric strikes and maglocks on FAAC, BFT, Linear, and Viking automated gate systems across Dallas. These locks integrate with the gate operator, so if the motor isn’t sending the unlock signal, the lock will never open regardless of its condition. Our technicians test the full circuit from the operator board to the lock before replacing any component. That integrated diagnosis is what separates a gate specialist from a general handyman service.
What does the warranty cover on a lock repair?
Every lock repair from Carver Gate Repair Dallas carries the 365-Day Done Right Promise in writing. That covers parts and labor on the work we performed for a full year from the date of service. If the lock fails within that window, we come back and fix it at no charge. It’s not an unwritten promise. It’s on the paperwork you’ll have in hand before we leave the property.
Can you rekey my gate to match my house key?
In most cases, yes. If your gate lock uses a standard keyway, we can rekey the cylinder to match your existing house key or key the gate and house to a new key together. Call (940) 531-9746 and tell us what type of lock you have on the gate. If you’re not sure, we’ll identify it during the visit and give you a written price for the rekey before we start.
Key Takeaways
- Gate lock repair in Dallas typically costs $120 to $280 for common mechanical work; electric lock replacement runs higher.
- The most common Dallas-specific cause of lock failure is post movement from clay-soil shifting, which pulls the latch out of alignment.
- Carver Gate Repair Dallas writes the price before any work starts: no surprises at the door.
- Every repair carries the 365-Day Done Right Promise in writing, good for one full year.
- Our technicians are background-checked, uniformed, and trained across FAAC, BFT, Linear, and Viking systems.
- One phone number, answered by a live person, 24 hours a day, every day of the year: (940) 531-9746.
Call Carver Gate Repair Dallas for Your Lock Repair
If your gate lock is binding, spinning, or just won’t secure, don’t wait for it to fail completely on a night you need it closed. Call (940) 531-9746 for a free estimate and a written price before any work begins. Our technicians are available across Dallas, same-day in most cases, and every repair is backed in writing for a full year. The person who answers the phone will schedule it. That’s how we’ve operated since 2008, and that’s how we’ll handle your gate.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Dallas.