Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterGate Repair Near You in Dallas, TX
If your gate won’t open, sags on its hinges, or makes a grinding noise every time the motor kicks on, you need a repair crew that can get to you fast. Carver Gate Repair Dallas serves the entire Dallas metro with same-day and next-day availability in most neighborhoods. Call (940) 531-9746 and you’ll reach a live person, not a voicemail box.
Our Gate Repair services cover gates and gate motors in Dallas, Irving, Carrollton, Mesquite, DeSoto, Lancaster, University Park, and Red Oak. Every technician arrives in uniform, passes a background check before they ever step onto your property, and hands you a written price before touching a single bolt. That’s The Garrison Standard we’ve operated under since 2008.
How Much Does Gate Repair Cost in Dallas?
Gate repair in Dallas typically runs $150 to $500 for most mechanical fixes. Gate motor replacement runs higher, usually $600 to $1,400 depending on the brand and whether you need a new swing arm, control board, or the entire operator. Here’s what Dallas homeowners can expect on a typical invoice:
| Repair Type | Typical Dallas Price Range |
|---|---|
| Hinge replacement or weld repair | $150 – $350 |
| Limit switch adjustment or replacement | $125 – $250 |
| Gate wheel or roller replacement | $100 – $275 |
| Loop detector diagnosis and repair | $175 – $375 |
| Swing arm or articulating arm repair | $200 – $450 |
| Full gate motor replacement (parts included) | $600 – $1,400 |
These are real numbers from the Dallas market, not national averages. A sagging wrought-iron gate in University Park costs different money than a sliding chain-link gate in DeSoto, but the ranges above reflect what we actually quote and invoice here. Every quote is written down before work starts, and that number doesn’t move. If we open a panel and find something unexpected, we stop, explain it, and get your sign-off before proceeding.
Fast, Local Gate Repair
Most Dallas calls get a technician out same day or next morning. We run crews across the metro every weekday and keep weekend slots open for emergency work. When a gate fails open or won’t latch, it’s not just an annoyance. A gate stuck half-open leaves your driveway exposed overnight.
Our dispatchers work from a live board, not an automated call tree. You call (940) 531-9746, tell us what’s happening, and we give you a straight answer on when a technician can be there. No “someone will call you back within 24 business hours.” That’s the part of gate repair that frustrates homeowners most, so we removed it.
We focus exclusively on gates. Not fences, not general contracting. That narrow focus means our trucks carry the parts that matter: control boards for LiftMaster and DoorKing units, limit switches, loop detector wire, hinge hardware, and gear kits for FAAC, BFT, Linear, Viking, Ghost Controls, and Mighty Mule systems. When your technician arrives, the part likely rides with them.
What to Expect When You Call
- You talk to a person. Dispatchers answer around the clock, every day of the year.
- You get an arrival window. Not “sometime between 8 and 5.” A real window, usually two hours.
- The technician arrives in uniform. Background-checked, with company ID. You know exactly who’s walking up your driveway.
- Written price before work. You approve the number. Then we start.
- Repair done, site cleaned. We haul off old parts unless you want them. Gate tested in front of you.
- Written guarantee in hand. Every repair covered for a full year. If it fails inside that window, the second visit is free.
Lonnie Burke runs Carver Gate Repair Dallas. He built this crew around a simple rule from The Garrison Code: write down the price, show up on time, and stand behind the work. It sounds basic because it is. The fact that it’s rare says more about the trade than about us.
What We Repair
Gate work splits into two buckets: the metal and the motor. We handle both, on every major brand installed across North Texas.
Mechanical Gate Repair
- Hinges and posts. Weld repairs, hinge replacement, and post re-setting. In Dallas clay soil, posts shift with the seasons. That’s the number one reason gates start dragging or won’t latch.
- Wheels and rollers. Sliding gates ride on a track. Worn wheels make the gate grind and strain the motor. We replace them before they shear.
- Gate alignment and sag. A gate that sags is a gate that eventually breaks a hinge or burns out a motor. We straighten, reinforce, and re-hang.
- Locks and latches. Mag locks, solenoid locks, mechanical latches. If it secures the gate, we fix it.
Gate Motor and Automation Repair
- Swing operators. Articulating arm and ram-style operators from FAAC, BFT, Viking, and LiftMaster.
- Slide operators. Chain-driven and belt-driven units from DoorKing, Linear, and Elite.
- Control boards. The brain of the system. We diagnose board failures, replace capacitors, and reprogram settings.
- Limit switches. These tell the motor when to stop. A bad limit switch makes the gate slam or stall halfway.
- Loop detectors. The sensor rings in your driveway that tell the gate when a car is present. We cut, splice, and replace loop wire, then test the detector’s frequency to match your operator.
- Remotes and keypads. Programming, replacements, and range issues.
We train on nine brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters because each brand uses different programming logic and different boards. A technician who only knows LiftMaster will waste hours figuring out a BFT. Ours don’t.
Areas We Cover
We’re based in Dallas and dispatch crews across the full metro. If you live in Dallas proper, we’re likely within 20 minutes of your driveway. We also run routes through Irving and Carrollton on the west side, Mesquite and Lancaster to the east and south, and University Park through the center. A technician assigned to DeSoto will often pick up Red Oak calls on the same route.
Not sure if you’re in our service area? Call (940) 531-9746 and ask. If we can’t get to you, we’ll say so outright. We don’t book calls we can’t make.
Neighborhood-Level Experience
Every Dallas neighborhood has its own gate headaches. In Highland Park and University Park, we see older wrought-iron driveway gates with original hinges failing after 30 years of Texas heat, which calls for Hinge & Post Repair. In Coppell and Carrollton, it’s mostly automatic community gates and alley entrance gates. In Mesquite and Lancaster, the soil shifts hard, and posts lean. In Lakewood and East Dallas, wooden gates rot at the bottom rail and pull away from the hinges. We carry different hardware and approach each job differently because the failure patterns differ.
Why Carver Gate Repair
You’ve probably had a bad experience with a contractor. Most Dallas homeowners have. The technician shows up late or not at all. The price quoted on the phone differs from the invoice. The work fails in three months and nobody answers your call. Those aren’t small frustrations. They’re the reason we wrote The Garrison Code in the first place.
Carver Gate Repair operates as part of the Garrison Partners family. We’ve held to The Garrison Standard since 2008. That standard has four parts:
- Written prices. You see the number before we work. It doesn’t change at the door.
- Background-checked technicians. Every single one. Uniforms and ID on arrival.
- Written guarantee. A full year, on every repair, in writing. If it fails within 365 days, the second visit costs you nothing.
- Live phone coverage. 24 hours a day, 7 days a week, weekends and holidays included. A human picks up.
That year-long guarantee is the 365-Day Done Right Promise. You’ll see it printed on the paperwork before you sign. It’s not a verbal promise. It’s a written obligation.
Each Carver Gate Repair location is independently owned and operated, but every one of them answers to the same Garrison Standard. Our home page lays out the full scope of work. This page focuses on the repair work we do right here in Dallas.
Safety Note on Gate Springs and Motors
Some gate components can hurt you if handled wrong. Gate motors carry high voltage at the capacitor. Tension springs on cantilever and swing gates store serious kinetic energy. A gate that decides to move while you’re underneath it can pin you. If your gate has visible spring tension, a motor that sparks, or a chain under load, don’t try to work on it yourself. Kill the power at the breaker and call a trained technician. Our crews carry proper tooling and follow lockout procedures on every motor repair. That’s not a liability disclaimer. It’s a reality of the trade.
Honest Answers to Common Dallas Gate Questions
We get the same handful of questions from Dallas homeowners every week. Here are straight answers.
How long does gate repair take?
Most mechanical repairs and motor swaps take two to four hours on site. Control board replacement runs faster, around 90 minutes. A gate that needs Weld & Rust Repair plus a new operator can take a full day. We’ll tell you upfront, before any work starts, how long your specific repair should take.
Is it cheaper to repair or replace a gate motor?
If the motor is under 8 years old, parts are available, and the board isn’t fried, repair is usually cheaper. If the motor is 10-plus years old or the gearbox is worn smooth, replacement makes more financial sense. We’ll show you the numbers both ways and let you decide. We don’t push replacements when a $150 part fixes the problem.
Do you offer emergency gate repair in Dallas?
Yes. A gate stuck open at 2 a.m. or a motor that won’t respond at 6 p.m. on a Sunday-or one needing Lock Repair-gets the same live dispatcher as a Tuesday afternoon call. Emergency calls may carry an after-hours fee. We’ll tell you the number before dispatching, not after the job is done.
What brands do you work on?
LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your gate motor is one of those nine, we have the training and usually the part on the truck. If it’s an obscure brand we’ve never touched, we’ll tell you that too and point you toward someone who can help.
FAQs
How fast can you get to my gate in Dallas?
Same-day service is available for most Dallas addresses when you call before 2 p.m. We’ll give you a two-hour arrival window when you book. Next-day appointments are standard for calls that come in later. For urgent situations, we run evening and weekend dispatches. Call (940) 531-9746 for today’s availability.
Do you serve my area near Dallas?
We serve Dallas and the surrounding metro, including Irving, Carrollton, Mesquite, DeSoto, Lancaster, University Park, and Red Oak. Our technicians run routes across the full area six days a week. If you’re inside the loop or in the near suburbs, the answer is almost certainly yes. Call (940) 531-9746 to confirm your address.
How much does gate repair cost in Dallas?
Expect $150 to $500 for most mechanical gate repairs. Gate motor replacement runs $600 to $1,400 depending on brand and system type. Every job gets a written price before work starts, so you’ll know your exact cost after the diagnostic. Call (940) 531-9746 for a free estimate.
Can you come out after hours or on weekends?
Yes. Our phones are answered by a live person 24 hours a day, 7 days a week, including weekends and holidays. After-hours dispatch may include an additional fee, and we’ll state that fee before you commit to the visit. Call (940) 531-9746 any time.
Ready to Get Your Gate Fixed?
Call (940) 531-9746. You’ll reach a live dispatcher who can book your repair, answer questions, and give you an honest arrival window. We’ll send a background-checked, uniformed technician to your driveway with a written price and the parts needed to fix your gate right the first time. The work comes with a written guarantee good for a full year. If it fails inside that window, we come back and fix it at no charge. That’s how we’ve operated since 2008, and that’s how we’ll operate at your house.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Dallas and nearby areas.
What Our Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Photo eyes cleaned and aligned. Gate stops for the dog like it should."
- Henry B."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.