Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Irving
Gate installation in Irving means planning for clay soil, wind, and HOA rules at the same time. We set posts deeper than code minimums, match operators to the gate’s actual weight and exposure, and route power so the opener doesn’t die in the first storm season. If you need a new driveway gate, pedestrian gate, or a full automated swing or slide system, call (940) 531-9746 for a written, upfront price before we ever pull tools off the truck.
Our crews work Irving neighborhoods daily, from Valley Ranch and Las Colinas down to the Hospital District and older central subdivisions. We know what fails here. We know what lasts. Lonnie Burke runs our operation, and every job in Irving goes out under the same rule: a written price before work starts, background-checked technicians on site, and a written one-year guarantee on the finished installation. That’s the Garrison Standard, and it’s been how we work since 2008.
Why Carver Gate Repair Dallas Is Irving’s Preferred Gate Installation Company
Irving homeowners deal with a specific set of gate problems: posts that heave out of plumb in expansive clay, solid infill gates that catch North Texas wind like a sail, and slide tracks that jam after hard rain saturates the ground. Most generalist contractors do not build for those conditions. We do.
Every technician who steps onto an Irving property is background-checked and uniformed. You know who’s coming, and they carry a written work order with the price you already approved. No number moves at the door. No upcharge once the footing is open. If the gate fails inside the first year for anything related to our installation, we return and fix it free. That’s the 365-Day Done Right Promise, written on every job.
We answer the phone around the clock. When a storm knocks your gate out of alignment at 9 p.m. in Valley Ranch, a real person picks up. Not a queue. Not a call-back form. You get scheduled, and a crew shows up inside a tight arrival window with the right parts for your opener, whether it’s LiftMaster, FAAC, Elite, or Mighty Mule.
Styles & brands we work with
Gate Installation Services in Irving
Gate Installation Services in Irving cover everything from a first-time driveway gate on a new build in Las Colinas to replacing a rusted tubular steel gate in an older central subdivision. The job starts with the soil under the posts, because that’s what decides whether the gate still operates square three years from now. In Irving’s expansive clay, standard 3-foot footings are often not enough. We recommend oversized or helical-pier footings wherever the soil has a history of movement, which in practical terms is most of the city west of Loop 12.
A typical manual driveway gate installation in Irving runs $2,200 to $5,800, depending on width, material, and whether we’re reusing existing posts or setting new ones. A pedestrian gate with new posts and hardware usually lands between $900 and $2,400. Those are installed prices, including concrete, hardware, and cleanup.
Driveway and Double Gate Installation
A double driveway gate needs a center post, two leafs, and usually a steel frame if the builder hung hollow aluminum leafs that sag after five years. In Irving we see a lot of double gates on larger lots in Valley Ranch and Las Colinas, and we size the hinges and posts for the actual leaf weight plus wind load.
Sliding and Pedestrian Gate Installation
Sliding gates work well on Irving properties where the driveway slopes or where swing room is limited near the street. The track bed matters more than the gate itself in this soil. We compact the base, set the track on a reinforced bed, and make sure drainage runs away from the rack so the pinion doesn’t chew through mud after every storm.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Irving
Electric Gate Installation in Irving pairs the right operator with the gate’s weight, cycle count, and wind exposure. A light tubular gate on a quiet street needs a different arm than a solid steel gate on a west-facing Las Colinas lot that takes full afternoon wind. We size the opener for the real load, not the brochure number.
Fully automated single swing gate systems in Irving typically run $3,800 to $7,500 installed, including the operator, safety photocells, control board, and power run. Sliding gate automation lands between $4,200 and $8,000. If you’re adding a keypad, intercom, or loop detector for vehicle exit, expect another $600 to $1,800 depending on the hardware and wire distance.
Control, Safety, and Power Runs
Every automated gate in Irving gets safety photocells across the opening and a force setting that reverses the gate if it meets resistance. That’s not optional. We run conduit for the power, set the arm or rack to the manufacturer’s spec, and program limits in front of you before we leave.
Solar and Battery Backup Systems
Irving storm outages leave automated gates dead unless there’s a battery. We install backup batteries that hold enough charge for 15 to 25 cycles during a power cut, and we can add a solar trickle panel where running line voltage to the gate post is impractical or too costly.
Trusted Brands We Service in Irving
Our Irving crews install and service operators from LiftMaster, FAAC, Elite, and Mighty Mule, among others. We keep common control boards, arms, photocells, and remotes stocked for fast turnaround, and we match replacement parts to the system already mounted on your property. That means less waiting on a distributor and fewer stripped threads from an adapter plate that should never have been used. If your HOA limits noise on a first-generation swing arm, we’ll spec a belt-drive or hydraulic operator that actually meets the board’s rules rather than arguing with them after install. Check our full Gate Installation service for what this includes on a standard job.
Common Gate Installation Problems We See in Irving Homes
- Clay soil heave moves post footings. Irving’s shrink-swell clay lifts and drops posts through wet-dry cycles, which tilts hinge posts and makes new gate frames bind within months. We fix this with deeper footings, helical piers, or oversized concrete collars.
- Wind load tears solid infill gates at the hinge post. West-facing exposures in Las Colinas and open lots near the Trinity River see wind gusts that a standard hinge wasn’t built for. Wind-rated bracing and reinforced hinge posts stop the failure.
- Builder-grade swing arms die early on heavy gates. Many 2000s-era Valley Ranch HOAs installed cheap actuators that now fail every few years. We retrofit with commercial-duty operators sized for actual gate weight and daily cycles.
- Slide tracks misalign after heavy rain. Saturated ground softens the track bed under apartment and condo complex gates, and the rack shifts off the pinion. A proper base and drainage detail prevents the recurring repair call.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Irving, TX
Manual gate installation in Irving runs $900 to $5,800 depending on size, material, and footings. Automated systems run $3,800 to $8,000. The biggest cost variables are soil condition at the post locations, gate material (steel runs higher than tubular aluminum), and how far power must run from the panel to the gate. When we quote, the number is written and fixed before any work begins. You get a line-item price, not a range that grows after the footing is dug. We offer free estimates for full installations, and our Irving coverage includes all neighborhoods from Valley Ranch to the Hospital District.
We Also Serve Cities Near Irving
Our crews run service to Dallas, Mesquite, Lancaster, and DeSoto for full gate installation and repair. If you’re just outside Irving, the same written pricing and one-year guarantee apply. Call and we’ll schedule a site measure at your property.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Irving
At minimum 36 inches, but in Irving’s expansive clay we recommend 42 to 48 inches with either an oversized concrete collar or helical piers to resist heave. Standard shallow footings in this soil start moving inside the first wet-dry cycle. For a gate that stays square, the footing has to extend below the zone where moisture swings the most. Call (940) 531-9746 for a soil-aware quote on your specific post locations.
Most swing and slide operators have a release handle or key that disengages the motor from the gate, letting you push the leaf open by hand. The release is usually under a small cover on the operator housing or on the arm itself. Pull it only after you confirm the gate has no tension on it, and never fight a binding gate. We demonstrate this on every automated install we complete in Irving, so you know exactly where the release is when a spring storm drops power.
Many do, though the requirements differ by association. Common rules address operator noise levels, gate color and finish, height limits, and whether the opener must be belt-drive or hydraulic rather than a cheaper chain-drive arm. Before we spec a system, we ask for the HOA’s design guidelines if your property falls under one. We’ve installed compliant gates in Valley Ranch and Las Colinas and can work with your committee’s approval process.
Binding after rain is almost always post movement, not hinge problems. When Irving’s clay saturates, it expands and tilts the hinge post, throwing the leafs out of plane so the latch post no longer lines up. The fix is resetting the post in a deeper or pier-supported footing, not shimming hinges. We inspect the post for the exact direction of movement and quote the reset with a written price.
Yes. A battery backup ties into the existing control board and keeps the operator powered through an outage, typically for 15 to 25 cycles depending on the battery and gate weight. Solar keeps the battery topped up between outages. We install and program backup systems on most major brands, and we’ll size the battery for your gate’s actual draw, not a generic rating. Call (940) 531-9746 for a free estimate on the upgrade.
Contact Carver Gate Repair Dallas for Gate Installation in Irving, TX
If you need a gate installed, reset, automated, or rebuilt after a storm, call us at (940) 531-9746. You’ll speak to a live person, get a written price before work starts, and have a background-checked crew on site with a one-year written guarantee on the installation. We serve all of Irving, including Valley Ranch, Las Colinas, and the Hospital District.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Irving with written-price, guaranteed gate installation.