Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Dallas Homeowners
A new gate installation in Dallas isn’t a weekend project you want to gamble on. It involves concrete footings, heavy steel or iron, swing geometry, and either a reliable motor or a well-balanced manual track. Get one piece wrong and you’ll be fighting a sagging, scraping mess within a season. Carver Gate Repair Dallas has installed and serviced gates across the metro since 2008, and every job follows The Garrison Standard: a written price before work starts, background-checked and uniformed technicians, and a written guarantee on every installation. Lonnie Burke leads the crew, and the work gets done right the first time. Call (940) 531-9746 for a free estimate.
Automatic Gate Installation
Automatic Gate Installation means adding a motorized operator, safety devices, and access controls to a gate so it opens and closes without you ever leaving the car. We install automatic systems on new gates and retrofit operators onto existing manual gates. In Dallas, a basic automatic gate installation on a single swing leaf typically runs $2,800 to $6,500, while a heavier sliding gate with full automation and safety loops lands between $5,000 and $12,000 depending on gate weight, power availability, and access control setup. Carver Gate Repair Dallas handles the entire job: operator, arms, loop detectors, photo eyes, and programming.
Operators and Safety Systems
Every automatic gate needs more than a motor. Code-compliant installations include photo eyes, safety edges or loop detectors, and an emergency release. We configure these so the gate stops and reverses on obstruction, not on impact.
We install and program openers from BFT, FAAC, Linear, and Viking. The right operator depends on gate weight, cycle frequency, and whether you’re powering a swing or slide. We size the motor to the job, not to what’s on a warehouse shelf.
Access Control Integration
Automatic gates work best when access is simple. We wire in keypads, remotes, intercoms, and smartphone controllers. If you already have a system, we’ll match the new wiring to it rather than tearing out what works.
For gated communities or shared driveways in Dallas, we add the controls that fit how many people need entry. You get clear instructions on adding or removing codes without a service call.
Styles & brands we work with
Gate Installation Services
Gate Installation Services cover the full scope of putting in a new gate: site evaluation, design, fabrication or ordering, post setting, concrete work, gate mounting, and final adjustment. We handle everything from a single pedestrian gate in Lakewood to estate entrances in Highland Park. A new manual driveway gate in Dallas usually runs $1,800 to $4,500 installed. An automatic gate with operator and access controls starts around $4,200 and goes up from there. Carver Gate Repair Dallas provides a written price covering the complete job before any work begins, so you know the full number from day one.
Site Evaluation and Recommendations
Before any quote, we visit the site. We check slope, post locations, existing concrete, buried utilities, and swing clearance. A gate that would scrape on a sloped driveway in Far North Dallas needs different hardware than one on a flat lot in DeSoto.
You get a straight answer about what will work and what will fight you. If an articulated or bi-fold layout saves you tearing out existing landscaping, we’ll say so.
Removal and Disposal of Old Gates
If you’re replacing a gate, we remove the old one and haul it away. That includes cutting out old posts when the new layout calls for it. The work area gets cleaned at the end of the day, no scrap or cutoffs left behind.
We also salvage and reuse what’s worth keeping. A solid operator, a working keypad, or good hinges can offset part of the new install cost.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation
Electric Gate Installation is the process of installing or retrofitting a gate with an electric operator, wiring, and safety controls so it opens automatically. We run dedicated electrical circuits from your panel to the gate location, set the operator, and connect all safety and access devices. In Dallas, retrofitting an existing manual gate with electric operation typically runs $3,000 to $7,800. A full new electric gate with operator, wiring, and controls ranges from $5,500 to $14,000 based on gate size and distance from power. Carver Gate Repair Dallas does the electrical work properly: conduit, weatherproof connections, and a dedicated breaker, never an extension cord.
Power Runs and Conduit
Most gate failures trace back to bad wiring. We trench and run conduit for a dedicated, code-compliant circuit. The wire is sized for the operator’s actual amp draw plus headroom for future accessories like intercoms or cameras.
If trenching across existing concrete or pavers isn’t practical in a Dallas neighborhood like University Park, we’ll discuss surface routing options before you’re locked into a quote. You choose after seeing options, not after we’ve started digging.
Low-Voltage vs. Line-Voltage Systems
Some operators run on 110V line voltage. Others use low-voltage transformers or solar-ready setups. We explain the tradeoffs for your specific gate before you spend a dollar.
For gates far from the house in larger lots around Red Oak or Lancaster, a low-voltage or solar-assisted system can avoid a costly long trench. We’ll lay out the real numbers, including what maintenance each option demands.
Driveway Gate Installation
Driveway Gate Installation is the complete job of adding a gate across a residential driveway: posts, gate leaves, hardware, and optionally an operator. We install single swing gates, double swing gates, and slide gates depending on your driveway width and front setback. A manual single driveway gate in Dallas typically runs $1,800 to $3,800 installed. A double swing gate setup starts around $3,500 and goes to $7,500. Adding automation pushes the total to $5,000 to $13,000. Carver Gate Repair Dallas sets posts deep enough for Dallas clay soil, on concrete footings, with hardware rated for the gate’s actual weight.
Single vs. Double Swing Layouts
A driveway under 14 feet wide usually suits a single leaf. Wider driveways in neighborhoods like Lake Highlands commonly need double leaves to keep the gate from swinging too far into traffic or the yard.
We factor in setback requirements, street slope, and how your vehicles enter the drive. If a slide gate fits better than a swing, we’ll recommend that before you spend money on the wrong design.
Post Depth and Dallas Soil
Dallas soil moves. It’s clay-based and swells with rain, shrinks in summer. Gate posts set shallow will lean within a year or two. We dig footings below the frost line and set posts in concrete, with steel reinforcement where gate weights demand it.
For heavy gates, we don’t rely on concrete alone. We use proper post brackets and hinge plates that distribute the load. You won’t be calling us back in eighteen months because the gate drags on one side.
Sliding Gate Installation
Sliding Gate Installation is the installation of a gate that moves horizontally along a track or cantilever system instead of swinging open. This is the right choice for driveways with steep slopes, limited swing clearance, or wide openings. A manual sliding gate in Dallas usually runs $2,500 to $5,500 installed. An automated sliding gate with a rack-and-pinion operator, safety loops, and controls ranges from $6,000 to $15,000 depending on gate weight and track length. Carver Gate Repair Dallas installs both ground-track and cantilever slide gates, including the steel base, guide rollers, and motor mounts.
Ground Track vs. Cantilever
A ground-track slide gate rolls on wheels along a steel track set in concrete. It’s simpler and less expensive. A cantilever gate hangs off posts with no ground track, which matters when dirt, gravel, or snow would clog a track.
In Dallas, ground-track gates are common on paved surfaces. If your driveway in Mesquite or Lancaster has gravel or uneven ground, a cantilever design avoids the maintenance headache of a fouled track.
Rack and Pinion Operators
Sliding gates use a rack gear mounted on the gate and a pinion gear on the motor. We align that gear so the gate moves smoothly instead of grinding. A misaligned rack wears out both the gear and the operator.
We service and install Viking and BFT slide operators, among others. Each brand has a specific torque range; we size the operator to the gate’s travel weight, not a guess.
Gate Opener Installation
Gate Opener Installation is the installation of the motorized operator that opens and closes a gate, including all associated controls and safety devices. We install openers on new gates and replace failing operators on existing gates across Dallas. A basic swing gate opener installed on an existing gate runs $1,500 to $3,200. A complete opener installation with new wiring, safety loops, and access controls ranges from $3,000 to $7,000. Carver Gate Repair Dallas stocks and installs operators from FAAC, BFT, Linear, and Viking, and we program every unit to your remotes, keypad, and smartphone app before we leave.
Operator Sizing and Cycle Ratings
Every operator has a cycle rating: how many open-close cycles it handles per day before it wears out. A busy driveway in Far North Dallas with multiple vehicles daily needs a heavier-duty unit than a gate opened once a week.
We ask about your actual usage patterns before recommending an operator. Buying a unit sized for light duty on a high-traffic gate just means paying for a replacement in a couple years.
Retrofit vs. Full Replacement
If your gate works but the operator is dead, we can often retrofit a new motor onto the existing mount. That saves significant money compared to replacing the entire gate.
We’ll tell you honestly if the existing hardware is worth saving. A corroded hinge on a 20-year-old gate in Lakewood makes a full replacement the smarter long-term call. Either way, the written price comes before any work starts.
Gate Fabrication
Gate Fabrication is the custom building of a gate to your driveway’s exact dimensions and your preferred style: ornamental steel, aluminum, wood, or a combination. We measure, design, build, and install gates that fit the opening precisely rather than forcing a prefabricated panel into the wrong space. Custom fabricated gates in Dallas typically start around $2,800 for a simple steel pedestrian gate and run $4,500 to $15,000 or more for large driveway gates with ornamental iron work. Carver Gate Repair Dallas works with local metal shops for fabrication, and handles all installation, hanging, and finishing in-house. The point of a fabricated gate is simple: it fits.
Custom Sizing and Design
Odd driveway widths, non-standard posts, or matching an existing fence line all call for a fabricated gate. We measure on-site and draw the layout before metal is cut. You approve the design before fabrication starts.
In older Dallas neighborhoods like Lakewood or Highland Park, driveway openings rarely match modern prefab sizes. A custom gate respects the original architecture instead of fighting it.
Materials and Finish Options
Steel gates can be powder-coated, primed for paint, or fitted with wood in-fill. Aluminum is lighter and rust-resistant but costs more per foot. We walk you through the tradeoffs for your budget and how much sun and rain the gate will face.
Dallas summers punish cheap finishes. We recommend and apply coatings that hold up to intense sun, not the cheapest can on the shelf. A properly finished gate doesn’t need re-coating every three years.
Brands We Service
FAAC operators appear on a lot of Dallas residential and light commercial gates. We’ve installed and repaired enough FAAC 390, 400, and 770 units to know their common failure points: limit switch drift, capacitor wear, and board corrosion from moisture intrusion. We stock FAAC parts and can usually diagnose an issue in one visit.
BFT openers are common on heavier slide gates. We install BFT units and service their hydraulic and electromechanical models, including replacement boards and limit adjustments. Linear builds reliable swing operators, and we’ve handled their residential and commercial lines. Viking slide operators are built for weight; we install and service those too. Whatever make is on your gate or going on your new one, we can work with it.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate scrapes or drags on one side. This usually means a post has shifted or a hinge is wearing out. Left alone, the weight of the gate keeps working against the hardware, and the damage compounds until something fails completely.
- You hear grinding when the gate moves. Grinding from a slide gate means the rack and pinion are misaligned or debris is in the track. Grinding from a swing gate often signals bad hinge bearings. Either way, early intervention costs far less than full replacement.
- The gate sags visibly when open. A sagging gate is a structural problem, not a cosmetic one. It’s usually a sign the hinges, post brackets, or gate frame itself are undersized for the weight. It won’t get better on its own.
- The opener struggles or reverses mid-cycle. If the motor sounds strained or the gate reverses for no visible reason, the operator may be undersized, the safety sensors may be failing, or the gate binding is overloading the motor.
- Rust is breaking through the finish. Dallas humidity and rainfall work on bare metal fast. Once rust starts at a joint or weld, it spreads underneath the coating. Catching it early means a repair and recoat. Ignoring it means replacing the gate leaf.
Our Process, Step by Step
- 1
On-site evaluation. We come to your Dallas property, measure the opening, check slopes, mark utilities, and discuss what you need the gate to do. You get a written recommendation, not a sales pitch.
- 2
Written quote. The full price is on paper before any work starts. It includes materials, labor, electrical work, and disposal. The number doesn’t move when we show up.
- 3
Permits and layout. If your city requires a permit for the gate, we pull it. We mark exact post locations and confirm swing or slide clearance before digging.
- 4
Installation. Our background-checked, uniformed crew sets footings, hangs the gate, runs the power, installs the operator and safety devices, and programs your access controls. The work area gets cleaned daily.
- 5
Final walkthrough and guarantee. We test the gate through full cycles, show you the emergency release, program your remotes and keypad, and leave you with the written guarantee. Every Carver Gate Repair installation is covered by the 365-Day Done Right Promise.
How Much Does Gate Installation Cost in Dallas?
In Dallas, gate installation pricing for a manual single driveway gate typically runs $1,800 to $3,800. Adding an electric operator moves the total to $3,000 to $7,800 for a retrofit or $4,200 to $13,000 for a full new automatic gate. Sliding gates run higher: $2,500 to $5,500 manual, $6,000 to $15,000 automated. Custom fabricated gates start around $2,800 and go up based on size, material, and ornamental work. What drives the price most is gate weight, power distance from the panel, access control complexity, and whether the existing posts can be reused.
The biggest way to overpay is to let a contractor quote you a base gate and then add electrical, controls, and disposal as “extras” after work begins. At Carver Gate Repair Dallas, the written price covers the full scope. Our free estimates include a site evaluation, measurements, and a line-by-line breakdown so you know exactly what you’re paying for. If a quote seems low, ask whether it includes post setting, wiring, safety devices, and removal. If those are missing, the final bill will not match the first one.
Our Service Area Near Dallas
Carver Gate Repair Dallas serves the city and surrounding suburbs including Irving, Carrollton, Mesquite, DeSoto, Lancaster, University Park, Red Oak, Far North Dallas, Highland Park, and Lake Highlands. We offer same-day and next-day scheduling across the metro, and our phones are answered by a live person around the clock. If you’re looking for Gate Installation in Dallas, you’ll get a real answer, a real arrival window, and a written price. For existing gates that need attention, see our home page for the full scope of gate repair and motor repair services.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Dallas
Gate installation is the process of designing, fabricating, and mounting a new gate at a driveway, side yard, or pedestrian entrance. It includes setting posts in concrete, hanging the gate leaf or leaves, installing hinges and hardware, and optionally adding an electric operator and access controls. A proper installation accounts for slope, soil, gate weight, and daily use.
Most residential gate installations in Dallas take one to three days from start to finish. That includes digging and setting posts, allowing concrete to cure, hanging the gate, and running electrical if required. Custom fabricated gates add time for the build, typically one to three weeks depending on the shop’s schedule. We confirm the timeline in writing before you approve the job.
A manual driveway gate in Dallas runs $1,800 to $4,500 installed for a standard size. Automatic gates with an operator, wiring, and access controls start around $4,200 and commonly reach $8,000 to $15,000 for heavier or custom work. The exact number depends on gate size, weight, automation, and power distance. Call (940) 531-9746 for a free written estimate.
Yes. We install and service operators from FAAC, BFT, Linear, and Viking, among others. Our technicians stock OEM parts for these brands and know their specific programming and failure patterns. If your gate has a different make, call us anyway. We’ll work with what’s there.
Our phones are answered by a live person 24/7, every day of the year, and we can often get a technician to you within one business day for urgent situations. For a damaged gate that won’t close, we can secure the opening temporarily and schedule a proper repair. New installations are scheduled, not rushed; that’s how we keep quality at the standard we write down for you.
Every gate installation from Carver Gate Repair Dallas carries the 365-Day Done Right Promise. The guarantee is written and covers the full year from the date of service. If the installation fails inside that window, we return to make it right at no charge. No fine print, no restocking fee.
Clear the work area: move vehicles, outdoor furniture, and anything stored near the gate or fence line. Mark any sprinkler lines or buried utilities you know about; we’ll handle the utility locate before digging. If you work from home and need access during the day, let our crew know in advance and we’ll stage the work around your schedule. A quick walkthrough with the lead technician on arrival day resolves most questions before work starts.
Schedule Your Gate Installation Service in Dallas Today
A new gate is a real investment, and it should come with a straight answer. Call (940) 531-9746 for a free, no-obligation estimate. You’ll get a written price before any work starts, a background-checked and uniformed technician on site, and a full-year written guarantee on the completed installation. We answer the phone 24/7, so call when it’s convenient.
Written by Lonnie Burke, Owner at Carver Gate Repair Dallas, serving Dallas and the surrounding metro since 2008.